9
FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION
FleetSync is an Alphanumeric 2-way Paging Function and is a protocol owned by
JVCKENWOOD Corporation
.
S
elcall
(S
elective
c
alling
)
A Selcall is a voice call to a particular station or to a group of stations.
■
Transmitting
1
Select your desired zone and channel.
2
Press the microphone
PTT
switch and begin your conversation.
■
Receiving
If enabled by your dealer, an alert tone will sound and the LED will blink when a
Selcall has been received.
To respond to the call, press the
PTT
switch and speak into the microphone.
■
Identification Codes
An ID code is a combination of a 3-digit Fleet number and a 4-digit ID number.
Each transceiver must have its own Fleet and ID number.
Note:
The ID range may be limited by programming.
P
aging
c
all
1
Select your desired zone and channel.
2
Press and hold the key programmed as
Paging Call
for 1 second to transmit
your PTT List ID, to request a call.
S
tatuS
M
eSSage
You can transmit pre-programmed status messages by pressing the keys
programmed as
Status 1
and
Status 2
.
Status messages are 2-digit codes ranging from 10 to 99 (80 ~ 99 are reserved for
special messages).
• “dt” appears on the display when sending a status message. “Ed” appears on the display
when receiving an acknowledgement. “Er” appears on the display during status message
no reply.
gPS R
ePoRt
If a GPS unit (NMEA-0183 format) is installed on your transceiver, you can press
the key programmed as
Send the GPS data
to send your location data.
