15
A
UXILIARY
P
ORT
If a key has been programmed with the
AUX A
or
AUX B
function, you can press
that key to turn the Auxiliary Port on and off.
• When Auxiliary Port A is activated, the AUX A indicator (
) appears on the
display.
• When Auxiliary Port B is activated, the AUX B indicator (
) appears on the
display.
GPS R
EPORT
If a GPS unit (NMEA-0183 format) is installed on your transceiver and the
Send
the GPS Data
function has been programmed onto a key by your dealer, press
the
Send the GPS Data
key to send your location data.
H
OME
A
DDRESS
If a key has been programmed with the Home Address function, you can press
that key to jump to the pre-programmed call address.
• “HAD” appears in the sub-display when the selected call address is the Home Address
Press
Home Address
a second time to return to the previous call address you
were using.
S
ITE
L
OCK
Press and hold this key for 1 second to lock the Site. "SITE LOCKED" momentarily
appears on the display. Press and hold this key again for 1 second to cancel Site
Lock.
S
UB
-LCD D
ISPLAY
If a key has been programmed with the
Sub-LCD Display
function, you can press
that key to toggle the sub-display between “SVC”, the current control channel
number, and the signal strength readout.
S
WITCHING
TO
C
ONVENTIONAL
M
ODE
Depending on how your transceiver is programmed, you can enter Conventional
Mode in one of two ways:
Manual: When in Trunking Mode, press the key programmed as
Conventional
to change the operating mode. This function only works when no signals are
currently being received.
Auto: The transceiver automatically changes to Conventional Mode when you are
outside the network area.
Содержание TK-7185
Страница 11: ...5 REAR PANEL External speaker jack Power input connector Antenna connector Ignition Sense Line ...
Страница 35: ......
