15
O
PTIONAL
F
EATURES
Short Messages:
Received short messages (maximum of 48 characters) are
displayed the same as Status messages {page 16}, however only 4 short
messages can be stored in the stack memory. “M” (Message) and the message
number appear with the message.
GPS Report:
If an external GPS receiver (NMEA-0183 format) is installed on
the transceiver and the Send GPS function is programmed onto a key by your
dealer, you can press the programmed key to send your location data.
S
ELCALL
(S
ELECTIVE
C
ALLING
)
A Selcall is a voice call to a particular station or to a group of stations.
■
Transmitting
1
Select your desired zone and channel/group ID.
2
Press the key programmed as
Message Mode
to enter Selcall Mode.
3
Rotate the
Selector
to select the ID of the station you want to call.
• You can also enter digits by using the DTMF keypad if Manual Dial is enabled.
(Press the
PF1
key or the
key to erase an incorrect digit.)
4
Press the
PTT
switch and begin your conversation.
■
Receiving
An alert tone will sound, the transceiver will automatically enter Selcall Mode,
and the calling station’s ID will appear when a Selcall is received.
To respond to the call, press the
PTT
switch and speak into the microphone.
■
Reviewing Caller IDs in the Stack Memory
The mail icon (
) will flash when a Selcall call is received and stacked.
1
Press and hold the key programmed as
Message Mode
for more than
1 second to enter Stack Mode.
• The last received Caller ID is displayed with the Caller ID number. “I” (ID)
appears with the number.
2
Rotate the
Selector
to select the ID you want to view (if more than one ID
is stored in the stack memory).
3
To erase the ID, press and hold the
PF1
key or the
key for more than
1 second.
