![background image](http://html.mh-extra.com/html/kenwood/tk-7150/tk-7150_instruction-manual_191708013.webp)
9
TRUNKING ZONES
P
LACING
A
D
ISPATCH
C
ALL
1
Select the desired trunking zone and a group ID.
2
Press and hold the
PTT
switch.
3
If the “Clear to Talk” tone sounds, communication is possible; start speaking
into the microphone. Release the
PTT
switch to receive.
• For best sound quality at the receiving station, hold the microphone approximately
1.5 inches (3 ~ 4 cm) from your mouth.
4
When your conversation is finished, return the microphone to its hanger.
R
ECEIVING
A
D
ISPATCH
C
ALL
1
When a dispatch call is received, the transceiver will automatically change to
the correct channel and you will hear the call.
2
Readjust the volume as necessary.
P
LACING
A
T
ELEPHONE
C
ALL
Note:
You can only make a telephone call if the telephone service is available and you have an optional
keypad microphone. Refer to “DTMF CALLS” on page 12. Consult your dealer for further details.
1
Select the desired trunking zone and a group ID.
2
Press and hold the
PTT
switch for approximately 1 second to ensure a
connection.
• Confirm that there is a dial tone after releasing the
PTT
switch.
3
Dial using the microphone keypad.
• After dialling, wait for a response from the called party.
4
When the called party responds, press and hold the
PTT
switch and speak
into the microphone. Release the
PTT
switch to receive.
• Only one person can speak at a time.
5
To end the call, press the
#
key or the key programmed as
TEL Disconnect
.
R
ECEIVING
A
T
ELEPHONE
C
ALL
1
When a telephone call is received, the transceiver will automatically change to
the correct channel and you will hear the call.
2
To respond to the call, press and hold the
PTT
switch and speak into the
microphone. Release the
PTT
switch to receive.
• Only one person can speak at a time.
3
To end the call, press the
#
key or the key programmed as
TEL Disconnect
.