TK-2360
7
DISASSEMBLY FOR REPAIR
1. Removing the Case Assembly from the
Chassis
1. Remove the volume knob
q
and selector knob
w
.
2. Remove the two screws
e
.
3. Lift and remove the chassis from the case assembly
r
.
:
@
.
;
.
Case assembly
2. Removing the TX-RX unit from the
Chassis
1. Remove the packing
t
from the chassis.
2. Remove the holder
y
from the chassis.
3. Detach the solder of speaker wire and mic wire from the
PCB beforehand.
4. Remove the packing
u
from the SP/MIC jack of the TX-
RX unit.
5. Remove the FPC from the fl at cable connectors
i
o
.
6. Remove the 13 screws
!0
fi xing the TX-RX unit.
Note:
Take care not to put stress onto the FPC when re-
moving the screw, as the FPC is sitting on the screw.
7. Lift and remove the TX-RX unit from the chassis
!1
.
8
>
2
B
=
