5 D-STAR
36
Gateway Call
5.3.2
By configuring
"TO"
to the repeater of the area to communicate with, followed by pressing
PTT, it is possible to establish communication with the stations that are able to access the
repeaters of the area.
The access repeater configured in
"FROM"
is connected via the Internet with the area
repeater configured in
"TO"
, thus enabling calls to be made to an area where radio signals
cannot be received directly.
As with a Local Area Call, configure
"FROM"
as the repeater that is directly accessible,
followed by configuring
[TO]
for the target according to the steps below.
1. Press and hold
[
▲
]
The Destination Select screen appears.
2. Select
"Gateway CQ"
and press
[ENT]
The
World Region
/
Country
/
Group
Select screen appears.
3. Select the regional group that corresponds to the repeater to connect to, and press
[ENT]
The Repeater List appears.
4. Select the repeater to connect to
Pressing
[
►]
displays the detailed information of the selected repeater.
Pressing
[ENT]
configures
"TO"
to the selected repeater.
Check whether connection to the area repeater configured in
"TO"
can be established.
As with a Local Area Call, perform kerchunk to check whether connection can be
established.
Response to Gateway Communication
5.3.3
When there is a call with a specified Gateway CQ or Callsign in the DR mode, a call back to
the calling station is made by configuring the Callsign of the calling station in
[TO]
of the
caller.
5.3.3.1
・
Manual configuration
1. After transmission to the receiving station is complete, press and hold
[ENT]
2. Select the Callsign of the calling station on the Call History Select screen, and press
[ENT]
The Callsign is configured in
"TO"
and the gateway communication route is
automatically selected.
