frequency.
The s t e p v a l u e s e t t i n g range I s 1 k H z — 50MHz. I f t h i s range i s
overstepped, the display changes to frequency display and the step value
returns to the value v a l i d before the new Input.
I f neither the ENT key nor kHz key i s pressed a f t e r the frequency has
been input and whI1e the LED i s flashing, the value shown on the display
returns to the frequency value displayed before the step value was input
when the FREQ (MHz) key © i s pressed again.
5) When the ENT key or kHz key i s pressed, the v a l u e of the frequency
display changes from step value to frequency i n d i c a t i o n and t h i s value
i s output.
6) When the STEP (FREQ) key @ i s pressed, the frequency display increases
or d e c r e a s e s i n a c c o r d a n c e w i t h t h e s e t s t e p i n t e r v a l and t h e
frequency value i s output.
4-2 OUTPUT LEVEL SETTING
4-2-1 NORMAL SETTING
As in the case of frequency setting, the CURSOR key © and the rotary encoder
© are used to enter the set value.
1) P r e s s the
A A
or • • key to move the c u r s o r to the LEVEL d i s p l a y
portion.
2) Press the
A
or • key to move the cursor to the d i g i t you want to s e t .
3) When the r o t a r y encoder i s rotated, the d i g i t under the cursor s t a r t s
changing. Set to desired value.
4) Repeat steps 2) and 3) u n t i l the desired output level value i s s e t .
5) Level units are either EMF dB// or dBm. Select either one by using the
unit selector switch @.
22
