to the one va 1 id before the input.
STEP : When you want to step up or step down the frequency at a certain
i n t e r v a l , set the i n t e r v a l as follows. Press the 2nd F key @.
Press t h i s STEP key and input the step value of the frequency by
using the numeric keys. F i n a l l y press the ENT key @.
® LEVEL (dBVSTEP key
LEVEL (dB): Used when the numeric keys are used f o r d i r e c t l y s e t t ing the
RF output l e v e l . The sett ing procedure i s the same as for the
FREQ (MHz) key © setting.
The s e t u n i t i s dB
u
when "dB
u
" 1 i g h t s on the l e v e l u n i t
display and dBm when "dBm" 1ights.
STEP : When you want to step up or step down the l e v e l at a c e r t a i n
i n t e r v a l , set the i n t e r v a l as follows. Press the 2nd F key © ,
then press t h i s STEP key and input the step value of the LEVEL
by using the numeric keys. F i n a l ly press the ENT key @.
© ADDR (address) key
Used when the numeric keys are used for direct setting of the address. The
sett ing procedure i s the same as for the FREQ key © sett ing.
® MOD (modulation)/P!LOT key
Used when the numeric keys are used f o r d i r e c t s e t t i n g of the modulat ion.
The s e t t i n g procedure i s the same as for the FREQ key © setting.
© Numeric Keys
Used when setting data. When a numeric key alone i s pressed, the last d i g i t
of the address changes.
© A F
Key
Used f o r measuring the deviation. Press the key once more to cancel t h i s
function.
© kHz
Key
When the frequency s e t t i n g should be kHz, press t h i s button instead of the
ENT key @
e
14
