Kenwood PureJuice One JMP40, Инструкция по эксплуатации

Страница: 7 / 19

4
to assemble your juicer
(A
è
I)
A
è
B
Fit the pulp stopper into the opening on
the underside of the juicing bowl
5
and
push in until secure.
C
Fit the juicing bowl
5
to the power unit
9
by positioning the juice spout to the
front.
D
Place the filter
4
into the juicing bowl
5
,
pushing down to secure into place.
E
Place the scroll
3
into the juicing bowl
and push down to secure. Note: the lid
cannot be fitted if the scroll is not fully
pushed down.
F
è
G
Fit the lid
2
onto the unit ensuring the
with the (graphic) on the power unit
(graphic) on the bottom of the bowl
unlock graphic
lock graphic / Fit the lid onto the unit and click into place (x)
filter holder assembly into the juicing bowl and align the (graphic)
(graphic) on the juicing bowl
switch graphic, on, off & reverse
lines up with the
▲
on the front
of the juicing bowl. Then turn the lid
clockwise until it clicks into place and the
with the (graphic) on the power unit
(graphic) on the bottom of the bowl
unlock graphic
lock graphic / Fit the lid onto the unit and click into place (x)
filter holder assembly into the juicing bowl and align the (graphic)
(graphic) on the juicing bowl
switch graphic, on, off & reverse
lines up with the
▲
on the front of
the juicing bowl.
H
è
I
Close the lid lock.
to use your juicer
(J)
Place the pulp container
7
under the
pulp spout
6
and place the juice jug
bo
under the juice spout
bm
. Ensure the anti-
drip stopper
bn
is in the open position
before juicing.
Switch on
bk
and feed the food items down
slowly using the pusher.
l
Use the recommended usage chart as
a guide for juicing different fruits and
vegetables.
l
To extract the maximum amount of juice,
always push the food down slowly using the
pusher. Do not use excessive force as the
food should be pulled down by the scroll.
l
If the food becomes jammed in the feed
tube or on the scroll and the juicer stops
operating switch to the ‘
with the (graphic) on the power unit
(graphic) on the bottom of the bowl
unlock graphic
lock graphic / Fit the lid onto the unit and click into place (x)
filter holder assembly into the juicing bowl and align the (graphic)
(graphic) on the juicing bowl
switch graphic, on, off & reverse ’ off position.
Then press and hold the ‘
with the (graphic) on the power unit
(graphic) on the bottom of the bowl
unlock graphic
lock graphic / Fit the lid onto the unit and click into place (x)
filter holder assembly into the juicing bowl and align the (graphic)
(graphic) on the juicing bowl
switch graphic, on, off & reverse ’ reverse button
down until the food becomes dislodged.
Once the food is released, you can start
juicing again.
hints and tips
l
Wash all fruit and vegetable thoroughly
before juicing.
l
To maximise juice extraction place small
quantities at a time in the feed tube and
push down slowly.
l
Hard foods are best juiced at room
temperature.
l
You do not have to remove thin peels
or skins. Only remove thick peels that
you would not eat e.g. those of oranges,
pineapples, melons and uncooked
beetroots.
l
Use fresh fruit and vegetables as they
contain more juice.
l
Remove stones and hard seeds from
cherries, plums etc.
l
Vitamins disappear - the sooner you drink
your juice, the more vitamins you will get.
l
If you need to store the juice for a few hours
put it in the fridge. It will keep better if you
add a few drops of lemon juice.
Health Recommendations
l
Do not drink more than three 230mls (8
fl.oz.) glasses of juice a day unless you are
used to it.
l
Dilute juice for children with an equal
amount of water.
l
Juice from dark green (broccoli, spinach
etc.) or dark red (beetroot, red cabbage
etc.) vegetables is extremely strong, so
always dilute it.
l
Fruit juice is high in Fructose (fruit sugar),
so people with diabetes or low blood sugar
should avoid drinking too much.
after juicing
(K)
After adding the last piece of food, allow
the juicer to run to help clear the juice
from the juicing bowl. The time will vary
depending on the fruit type and thickness
of the juice extracted.
Switch off and wait until the final flow of
juice has reduced to a few slow drips. Then
place the anti-drip stopper
bn
in position
before removing the jug.
Refer to the troubleshooting
section if you experience any
problems with the operation of
the juicer.