8
S
elcAll
(S
elective
c
Alling
)
A Selcall is a voice call to a particular station or group of
stations. Each transceiver is set up with an individual ID
number for use with selcalls.
■
m
Aking
A
S
elcAll
Press the
CAL
key.
Press the
or key to select an ID number.
• “Id” represents a single station, “GP” represents a group of
stations, and “AL” represents all stations.
Press the
PTT
switch to transmit the selected selcall ID.
• The transceiver waits for the Data Transmit Modulation
Delay time {page 29} before transmitting the selcall ID.
• The side tone sounds if PTT ID side tone {page 30} is
enabled.
Release the
PTT
switch, then continue the call as
normal when you receive a response.
Press the
CAL
key to end the call.
Note:
If Optional Signalling (menu “oP”) has been set to “FS”
(FleetSync), you can also set up an Individual Selcall Alert
type (menu “IA”) and Group Selcall Alert type (menu “GA”).
Individual and Group Selcall Alert types range from “-oF” (off)
and “- 1” (type 1) to “-10” (type 10). Refer to the menu list on
page 45.