• While adjusting the VOX Delay Time, speak into the
microphone to simulate transmitting. The LED lights orange
while speaking, but no signal is transmitted at this time.
Press the
MENU
key to confirm the selection.
Press the
PTT
,
MON
, or
CAL
key to exit Setting Mode.
voX t
rAnSmit
i
nhiBit
While using VOX, you can set the transceiver to detect when
the channel is in use (in place of using the Monitor function).
With this function turned on, VOX will not allow you to transmit
while the channel is being used. You can transmit only when
the channel is free. Setting up the proceed tone function
{page 23} will notify you when the channel is free.
With the transceiver power OFF, press and hold the
MENU
key while turning the transceiver power ON (for 1 second).
Press the
or
key to select “tI”.
Press the
MENU
key then press
or
to select “tI-on”
(transmit inhibit on) or “tI-oF” (transmit inhibit off).
Press the
MENU
key to confirm the selection.
Press the
PTT
,
MON
, or
CAL
key to exit Setting Mode.
