Press the
MENU
key then press
or
to select “GL-oF”
(VOX function off) or “GL- 1” (VOX gain level 1) to “GL- 5”
(VOX gain level 5).
• While adjusting the VOX Gain, speak into the microphone.
When an appropriate level is reached, the LED lights orange.
• Setting the VOX gain to OFF deactivates VOX. In order to
transmit with VOX turned off, you must use the
PTT
switch.
Press the
MENU
key to confirm the selection.
Press the
PTT
,
MON
, or
CAL
key to exit Setting Mode.
voX d
elAy
t
ime
If the transceiver returns to receive mode too quickly after
you stop speaking, the end of your message may not be
transmitted. To avoid this, select an appropriate delay time that
allows your entire message to be transmitted. However, do not
make the delay overly long.
With the transceiver power OFF, press and hold the
MENU
key while turning the transceiver power ON (for 1 second).
Press the
or
key to select “dY”.
Press the
MENU
key then press
or
to select “dY-0.1”
(0.1 seconds), “dY-0.3” (0.3 seconds), “dY-0.5”
(0.5 seconds), “dY-1.0” (1 second), “dY-1.5” (1.5 seconds),
or “dY-3.0” (3 seconds).