BASIC OPERATIONS
SWITCHING POWER ON/ OFF
Press
[ ]
to switch the transceiver ON.
Press
[ ]
again to switch the transceiver OFF.
ADJUSTING THE VOLUME
Press the button programmed as
[Volume Up]
to increase the volume. Press the
button programmed as
[Volume Down]
to decrease the volume.
SELECTING A ZONE AND CHANNEL
Select the desired zone and channel using the buttons programmed as
[Zone Up]
/
[Zone Down]
and
[Channel Up]
/
[Channel Down]
.
●
The transceiver may have names programmed for zones and channels. The zone name
and channel name can contain up to 14 characters. While selecting a zone, the zone name
will appear above the channel name.
●
If programmed by your dealer, your transceiver will announce the zone and channel
numbers as you change them.
TRANSMITTING
1
Select the desired zone and channel.
2
Press the
PTT
switch and speak into the microphone. Release the
PTT
switch to
receive.
●
The LED indicator lights red while transmitting and green while receiving a signal. This
indicator can also be disabled by your dealer.
●
For best sound quality at the receiving station, hold the microphone approximately 1.5
inches (3 cm to 4 cm) from your mouth.
RECEIVING
Select the desired zone and channel. If signaling has been programmed on the
selected channel, you will hear a call only if the received signal matches your
transceiver settings.
12
