67
Non-LCD Model
If your transceiver is password protected, the LED will light blue when you turn the
transceiver ON. Enter the password (up to 6 digits) using the following procedure.
1
Set the
Selector
to position “1”.
2
Press the
Side 1
or
Side 2
button to enter the first digit.
• The
Side 1
button increases the digit value and the
Side 2
button
decreases it. The transceiver announces the digit number as it changes.
3
Repeat step 2 for Selector positions 2 ~ 6.
• If there are less than 6 password digits, repeat for only the number of digits
the password contains.
4
Press the
PTT
switch to confirm the password.
• When the correct password is entered, the Blue LED turns off.
