13
TRANSMITTING
1
Select the desired zone and channel.
2
Press the button programmed as
[Monitor]
or
[Squelch Off]
to check whether
or not the channel is free.
• If the channel is busy, wait until it becomes free.
3
Press the
PTT
switch and speak to the microphone. Release the
PTT
switch to
receive.
• The LED indicator lights red while transmitting and green while receiving a
signal. This indicator can also be disabled by your dealer.
• For best sound quality, hold the transceiver approximately 3 ~ 4 cm (1.5
inches) from your mouth.
• In Site Roaming, In Voting and Voting with Signaling zones, the transceiver
will search for the strongest signal repeater and transmit using that
repeater’s frequency.
Making Group Calls (NXDN/ DMR)
You can select a group ID from the list to make a call to those parties on a channel.
1
Press the button programmed as
[Group]
,
[Group + Short Message]
or
[Group + Status]
to enter Group Call Mode.
• Alternatively, press the button programmed as
[Menu]
to enter Group Call
Mode using the Menu Mode.
• The group ID list appears on the display.
2
Press the
[
<B
]
and
[ C> ]
buttons to select a Group ID/ name from the list
that has been programmed into your transceiver.
3
Press and hold the
PTT
switch to make the call.
• The “ ” indicator blinks. The Group name of the target transceiver are
displayed.
• Speak to the microphone as you would during a normal call.
