17
Fleetsync: alphanUmeRIc 2-way pagIng FUnctIon
FleetSync is an Alphanumeric 2-way Paging Function, and is a
protocol owned by JVCKENWOOD Corporation.
Note:
This function is available only in analog operation.
selcall (selectIve callIng)
A Selcall is a voice call to a station or group of stations.
■
Transmitting
1
Select your desired zone and channel.
2
Press the key programmed as
[selcall], [s
sDm]
or
[s status]
to enter Selcall mode.
3
Press
/
to select the station you want to call.
• If Manual Dialing is enabled, you can directly enter the
station ID.
4
Press the
PTT
switch and begin your conversation.
■
receiving
An alert tone will sound and the transceiver will enter Selcall
mode. The calling station’s ID will appear when a Selcall is
received. You can respond to the call by pressing the
PTT
switch and speaking into the microphone.
■
Identification codes
An ID code is a combination of a 3-digit Fleet number and a
4-digit ID number. Each transceiver has its own ID.
• Enter a Fleet number (100 ~ 349) to make a fleet call.
• Enter an ID number (1000 ~ 4999) to make an individual call in your fleet.
• Enter a Group ID (which is programmed in the FPU) to make a group call.
• Enter a Fleet number followed by an ID number to make an
individual call in your desired fleet (Inter-fleet call).
• Select “ALL” Fleet and “ALL” ID to make a call to all units
(Broadcast call).
• Select “ALL” Fleet and enter an ID number to make a call to the
