ENGLISH
61
CONNECTION/INSTALLATION
CONNECTION/INSTALLATION
❏
Supplied accessories for installation
1
Wiring harness x 1
2
Extension wire (2 m) x 1
3
Flat head screws (M5 x 8 mm) x 6
4
Round head screws (M5 x 8 mm) x 6
5
Microphone (3 m) x 1
❏
Installation procedure
1
To prevent a short circuit, remove the key
from the ignition and disconnect the
·
battery.
2
Make the proper input and output wire
connections for each unit.
3
Connect the speaker wires of the wiring
harness.
4
Connect the wiring harness wires in the
following order: ground, battery, ignition.
5
Connect the wiring harness connector to
the unit.
6
Install the unit in your car.
• Make sure that the unit is installed securely
in place. If the unit is unstable, it may
malfunction (eg, the sound may skip).
7
Reconnect
the
·
battery.
8
Press the reset button. (Page 3)
9
Configure
<Initial Settings>
. (Page 4)
Installing the unit
❏
Installing the unit using the mounting
bracket removed from the car
Car Bracket
3
or
4
3
or
4
• Select the appropriate type of screw for the
mounting bracket: flat head (
3
) or round head
(
4
).
2017̲KW-V̲Entry̲K.indb 61
2017̲KW-V̲Entry̲K.indb 61
2016/06/02 21:22
2016/06/02 21:22