KRF-V5100D/V6100D
2
ACCESSORIES / CAUTIONS
FM indoor antenna (1)
(T90-0877-05)
AM loop antenna (1)
(T90-0893-05)
Remote control unit (1)
Batteries (R03/AAA) (2)
(A70-1670-05)
Accessories
Cautions
Resetting the Microcomputer
The microcomputer may malfunction (unit cannot be operated,
or shows an erroneous display) if the power cord is unplugged
while the power is ON, or due to some other external factor. If
this happens, execute the following procedure to reset the
microcomputer and return the unit to its normal operating
condition.
With the power cord plugged in, turn the POWER
ON/OFF key OFF. Then, while holding down the ON/
STANDBY key, press the POWER ON/OFF key.
Please note that resetting the microcomputer will clear the contents
of the memory and return the unit to the state it was in when it left
the factory.
Memory back up function
Please note that the following items will be deleted from the unit's
memory if the power cord is disconnected from the AC outlet for
approximately 1 day.
Power mode
Input selector settings
Picture output
Speaker ON/OFF
Volume level
BASS, TREBLE, INPUT level
TONE ON/OFF
LOUDNESS ON/OFF
ACTIVE EQ mode
Dimmer level
MD/TAPE settings
Input mode setting
Speaker settings
Sound mode settings
Distance setting
Listen mode setting
Broadcast band
Frequency setting
Preset stations
Tuning mode
Information on Disposal of Old Electrical and
Electronic Equipment (applicable for EU countries
that have adopted separate waste collection
systems)
Products with the symbol (crossed-out wheeled bin)cannot
be disposed as household waste.
Old electrical and electronic equipment should be recycled
at a facility capable of handling these items and their waste
byproducts.
Contact your local authority for details in locating a recycle facility
nearest to you.
Proper recycling and waste disposal will help conserve resources
whilst preventing detrimental effects on our health and the
environment.
