10
installation
•
Do not bend your drain hose.
14. Make sure your plumbing is suitable for
use with the dishwasher. If in doubt contact
a qualified plumber. This unit MUST BE
connected to COLD WATER MAINS using
the new water inlet hose. OLD HOSE SETS
MUST NOT BE RE-USED. The water
pressure from the water mains needs to be at
a minimum of 0.04 MPa and a maximum of
1.00MPa.
•
Connect one end of the safety water
supply hose to your dishwasher, and then
connect the other end of the hose to your
water mains. Please ensure the black
rubber seal is in place.
•
After connecting the hose, turn on your
water mains and check for leaks.
•
Connect the dishwasher to the mains
socket.
water mains
water supply hose
Y-Adaptor
(not included)
Connect to
another
appliance
if required.
You may use a Y-Adaptor (not included)
for an additional water feed for another
appliance, for example a washing
machine. This is only applicable for cold
water mains. A Y-Adaptor is available
from most DIY stores.
screw
cone
gear
level
13. Adjust the adjustable feet again to obtain the
optimum levelling of the unit.
KID60S10_IB_110426.indd 10
4/27/11 5:47 PM
Содержание KID60B10
Страница 1: ...Dishwasher KID60S10 installation instructions manual KID60S10_IB_110426 indd 1 4 27 11 5 46 PM ...
Страница 2: ...KID60S10_IB_110426 indd 2 4 27 11 5 46 PM ...
Страница 34: ...KID60S10_IB_110426 indd 34 4 27 11 5 48 PM ...
Страница 35: ...KID60S10_IB_110426 indd 35 4 27 11 5 48 PM ...