Kenwood KDC-X5200BT, Инструкция по эксплуатации

Страница: 31 / 128

ENGLISH
27
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Do the required wiring.
( 28)
Dashboard of
your car
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
How to remove the unit
1 Detach the faceplate.
2 Fit the catch pin on the extraction keys into
the holes on both sides of the trim plate, then
pull it out.
3 Insert the extraction keys deeply into the
slots on each side, then follow the arrows as
shown on the illustration.
Installing the unit (in-dash mounting)
Hook on the top side
Orientate the trim
plate as illustrated
before fitting.
INSTALLATION/CONNECTION
Part list for installation
Basic procedure
1 Remove the key from the ignition switch, then disconnect the
[
terminal of the car battery.
2
Connect the wires properly.
See Wiring connection. ( 28)
3 Install the unit to your car.
See Installing the unit (in-dash mounting).
4
Connect the
[
terminal of the car battery.
5 Press to turn on the power.
6 Detach the faceplate and reset the unit within 5 seconds. ( 3)
(A)
Faceplate
(C) Mounting sleeve
(B)
Trim plate
(D) Wiring harness
(E)
Extraction key
JS_KWD_KDC_X5200BT_EN_EN_3.indd 27 JS_KWD_KDC_X5200BT_EN_EN_3.indd 27 8/21/2017 2:11:50 PM 8/21/2017 2:11:50 PM