Kenwood KDC-BT945U, Инструкция по эксплуатации

Страница: 43 / 101

English
|
43
Reference point
FRONT FRONT
SUB-W
REAR
REAR
1.7 feet
4.9 feet
+0 feet
+3.2 feet
2.6 feet
+2.3 feet
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
Car Type Fine Adjustments
Adjusting fine tuning of the speaker position
compensation value specified at
<Car Type
Selection> (page 42) .
Display Item Range
“Front” Front speaker
0 – 14.44 feet
“Rear” Rear speaker
0 – 14.44 feet
“SW” Subwoofer
0 – 14.44 feet
( : Factory setting)
1
Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than “STANDBY”.
✍
SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Enter Car Type Adjustment mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Detailed Setup”
>
“Car Type Adjust”.
4
Select the item you want to set
Operation type Operation
Selects the item. Turn the [VOL] knob.
Adjust each item. Press the [
4
] or [
¢
] button.
Set the value Press the [VOL] button.
The settings of the delay time are automatically
identified and compensated by specifying the
distances of each speaker from the center of the
vehicle interior.
1 Set the front and rear positions and the height
of the reference point to the position of the ears
of the person sitting in the front seat, and set
the right and left positions to the center of the
vehicle interior.
2 Measure the distances from the reference point
to the speakers.
3 Calculate the distance difference in accordance
with the farthest speaker.