Kenwood KDC-BT945U, Инструкция по эксплуатации

Страница: 52 / 101

52
|
KDC-X994/ KDC-BT945U/ KDC-X794/ KDC-MP745U
Bluetooth Setup
Function of KDC-X994/ KDC-BT945U
KDC-X794/ KDC-MP745U with KCA-BT200 (Optional Accessory)
Function of KDC-X794/KDC-MP745U
Adding a Voice Dialing Command
Add a voice tag to the phone book for voice dialing.
You can register up to 35 voice tags.
1
Enter Bluetooth mode
Press the [PLAY MODE] button for at least 1
second.
✍
You can also select from “Settings” in Menu List
mode.
2
Enter Phone book name edit mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings”
> “Voice Tag” > “PB Name
Edit”.
3
Search for the name to register
Select the name to register with reference to 4 in
<Calling a Number in the Phone Book> (page 26) .
If a voice tag has already been registered for a
name, “*” is displayed before the name.
4
Select a mode
Turn the [VOL] knob.
Display Operation
“PB Name Regist” Register a voice tag.
“PB Name Check”* Play a voice tag.
“PB Name Delete”* Delete a voice tag.
“Return” Return to step 2.
* Displayed only when a name for which a voice tag has
been registered is selected.
Select “PB Name Regist” (Regist)
5
Register a voice tag (first)
“Enter Voice 1” is displayed.
When a beep is heard, say a voice tag within 2
seconds.
6
Confirm the voice tag (second)
“Enter Voice 2” is displayed.
When a beep is heard, say the same voice tag as
that you said in step 6 within 2 seconds.
“Completed” is displayed.
7
End registration
Press the [VOL] knob.
Return to step 2. You can register another voice tag
continuously.
⁄
• If your voice cannot be recognized, a message is
displayed. Pressing the [VOL] knob allows you to retry
voice input. (page 52)
Select “PB Name Check” (Play)
5
Press the [VOL] knob.
Play the registered voice and return to step 2.
Select “PB Name Delete” (Delete)
5
Delete a voice tag
Press the [VOL] knob.
6
Turn the [VOL] knob to select “YES”, and then
press the [VOL] knob.
Exit BT Settings mode
Press the [PLAY MODE] button for at least 1
second.
⁄
• Audio sound is not output during voice tag registration.
Function of KDC-X794/KDC-MP745U
Setting a Voice Command for
Category
Add a voice tag to the phone number category
(type) for voice calling.
1
Enter Bluetooth mode
Press the [PLAY MODE] button for at least 1
second.
✍
You can also select from “Settings” in Menu List
mode.
2
Enter Phone Number type edit mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings”
> “Voice Tag” > “PN Type
Edit”.
3
Select the category (type) you wish to set
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “General”, “Home”, “Office”, “Mobile”, or
“Other”
4
Select a mode
Turn the [VOL] knob.
Display Operation
“PN Type Regist” Register a voice tag.
“PN Type Check”* Play a voice tag.
“PN Type Delete”* Delete a voice tag.
“Return” Return to step 2.
* Displayed only when a name for which a voice tag has
been registered is selected.
5
Register the category (type) by performing
steps 5 to 7 in
<Adding a Voice Dialing
Command> (page 52) .