Kenwood KDC-BT755HD, Быстрый старт

Страница: 28 / 44

26
|
KDC-X797/ KDC-BT755HD
English
|
27
10. AUDIO SETTINGS
BALANCE L15
to
R15
(
0
): Adjust the left and right
speaker output balance.
FADER R15
to
F15
(
0
): Adjust the rear and front
speaker output balance.
SUBWOOFER SET ON
: Turns on the subwoofer output. ;
OFF : Turns off the subwoofer output.
DETAILED SET
HPF THROUGH : All signals are sent to the front
speaker. ;
100/ 120/ 150 (HZ)
: Frequencies lower than
the specified value are cut off.
LPF SUBWOOFER
†
THROUGH
: All signals are sent to the
subwoofer. ; 85HZ/ 120HZ/160HZ :
Frequencies higher than the specified value
are cut off.
SUB-W PHASE
†
REVERSE (180°)/ NORMAL (0°): Select the
phase angle of the subwoofer output to be
in line with the speaker output for optimum
performance. (Selectable only if a setting other
than “THROUGH” is selected for “LPF SUB-W”.)
SUPREME SET ON : Creates realistic sound by interpolating
the high-frequency components that are lost
in MP3/WMA/AAC/WAV audio compression
and iPod. ;
OFF : Disables creation. (Selectable only when
playing back an MP3/WMA/AAC/WAV disc,
USB device or iPod.)
VOLUME OFFSET –8
to
+8
(
0
) (for AUX) ;
–8
to
0
(for other
sources): Presets the volume adjustment
level of each source. The volume level will
automatically increase or decrease when
you change the source. (Before making an
adjustment, select the source you want to
adjust.)
(
Colored text
: Factory setting)
† “SUB-W LEVEL”/ “LPF SUBWOOFER”/ “SUB-W PHASE” is
selectable only if “SUBWOOFER SET” is set to “ON”.
About Supreme
•
Technology to extrapolate and supplement with proprietary
algorithm, the high-frequency range that is cut off when
encoding at low bit rate.
Supplementing is optimized by compression format (AAC,
MP3, WMA or WAV) and processed according to bit rate.
The effect is negligible with music that is encoded at high
bit rate, variable bit rate or has minimal high frequency
range.
10.1 Audio controls
You can adjust audio by setting the following audio
control items;
1
Press [
8
SRC] to select a source other than
“STANDBY”.
2
Press the volume knob to enter Function
mode.
“FUNCTION” appears.
3
Turn the volume knob to select AUDIO
CONTROL , then press the knob.
4
Turn the volume knob to select an audio
control item, then press the knob.
- See table below for selection.
- Repeat step 4 until the desired item is selected/
activated.
- Press [
6
] to return to the previous item.
5
Press and hold [ 6 ] to exit.
Display Description
SUB-W LEVEL
†
–15
to
+15
(
0
): Adjust the subwoofer output
level.
BASS LEVEL –8
to
+8
(
0
): Adjust the level to memorize in
each source. (Before making an adjustment,
select the source you want to adjust.)
MID LEVEL
TRE LEVEL
EQ PRO (for
KDC-X797
)
BASS ADJUST
BASS CTR FRQ 60/ 80/ 100 / 200
: Select the center frequency.
BASS LEVEL –8 to +8 ( 0 ): Adjust the level.
BASS Q FACTOR 1.00 / 1.25/ 1.50/ 2.00
: Adjust the quality
factor.
BASS EXTEND ON
: Turns on the extended bass. ;
OFF
: Turns off the extended bass.
MID ADJUST
MID CTR FRQ 0.5K/ 1.0K / 1.5K/ 2.5K : Select the center
frequency.
MID LEVEL –8
to
+8
(
0
): Adjust the level.
MID Q FACTOR 0.75/ 1.00 / 1.25
: Adjust the quality factor.
TRE ADJUST
TRE CTR FRQ 10.0K/ 12.5K / 15.0K/ 17.5K
: Select the
center frequency.
TRE LEVEL –8
to
+8
(
0
): Adjust the level.
PRESET EQ NATURAL / USER/ ROCK/ POPS/ EASY/
TOP40/ JAZZ/ POWERFUL
: Select a preset
sound mode suitable to the music genre.
(Select “USER” to use the customized bass,
middle, and treble settings.)
BASS BOOST LV1/ LV2/ LV3 : Select your preferred bass
boost level. ; OFF : Disables level selection.
LOUDNESS LV1 / LV2
: Select your preferred low and high
frequencies boost to produce a well-balanced
sound at a low volume level. ;
OFF
: Disables
level selection.
9. AUX
9.1 Start listening
Preparation:
• Select “ON” for “BUILT-IN AUX”. See <3.3 Changing
the initial settings> (page 11)
1
Open the cover.
2
Connect a portable audio player
(commercially available).
(a)
(b)
1
2
(a) 3.5 mm stereo mini plug audio cable
(commercially available)
(b) Portable audio device (commercially available)
3
Press [ 8 SRC] to select AUX .
4
Turn on the portable audio player and start
playback.
Display Selection
Press [SCRL DISP] repeatedly to select an
information.
SOURCE NAME ; CLOCK
9.2 Set the AUX name
You can set the AUX name to be displayed when
switching to the AUX source.
1
Press the volume knob to enter Function
mode.
“FUNCTION” appears.
2
Turn the volume knob to select SETTINGS ,
then press the knob.
3
Turn the volume knob to select AUX NAME ,
then press the knob.
4
Turn the volume knob to select a desired AUX
name to be displayed for AUX source and then
press the knob.
“AUX”, “DVD”, “PORTABLE”, “GAME”, “VIDEO”, or “TV”.
5
Press and hold [
6
] to exit.