Kenwood KDC-BT755HD, Быстрый старт

Страница: 26 / 44

22
|
KDC-X797/ KDC-BT755HD
English
|
23
7. Aha™ RADIO
7.1 Requirements Aha™
Requirements for listening to Aha™ are as follows:
• In the application on your device, log in and create
a free account with Aha.
• Internet connection by 3G, LTE, EDGE, or WiFi.
iPhone or iPod touch
• Use an Apple iPhone or iPod touch running iOS4
or later.
• Search for “Aha” in the Apple iTunes App Store to
find and install the most current version of the Aha™
application on your device.
• iPhone/ iPod touch connected to this unit with a
KCA-iP102.
Android™
• Use Android OS 2.2 or later.
• Download the Aha™ application to your
smartphone from the Google play.
• Bluetooth must be built in and the following profiles
must be supported.
- SPP (Serial Port Profile)
- A2DP (Advanced Audio Distribution Profile)
Notes
•
Because Aha™ is a third-party service, the specifications
are subject to change without prior notice. Accordingly,
compatibility may be impaired or some or all of the services
may become unavailable.
•
Some Aha™ functionality cannot be operated from this unit.
7.2 Start listening
Android
Preparation :
•
You need to register your smartphone before using it with
this unit. See
<12.2 Registering a Bluetooth device> (page
30) .
• Disconnect the iPhone or iPod touch.
•
Make sure “ON” is selected for “AHA SRC”. <7.5 Aha source
control> (page 23)
1
Open the Aha™ application on your
smartphone.
2
Press [ 8 SRC] to select AHA .
(a)
(b)
(a) Connection through Bluetooth
(b) Android smartphone (commercially available)
- Speakers are selectable by the Bluetooth setting
“BT HF/AUDIO”. The default is the front speakers.
See <BT HF/AUDIO> (page 37) .
iPhone or iPod touch
Preparation :
•
Make sure “ON” is selected for “AHA SRC”. <7.5 Aha source
control> (page 23)
1
Open the Aha™ application on your
smartphone.
2
Open the cover.
3
Connect an iPhone to the USB terminal.
4
Press [ 8 SRC] to select AHA .
(a)
(b)
2
3
(a) KCA-iP102 (optional accessory)
(b) iPhone or iPod touch (commercially available)
Removing the iPhone
1
Press [
8
SRC] to select a source other than
“PANDORA”, “AHA“, “IHEATRADIO“ or “iPod”.
2
Remove the iPhone.
Error messages
• CHECK DEVICE
: Any device ready for aha reception is not
connected to this unit.
• CHECK APP
: The Aha application is stopped. Start the Aha
application of the your device.
• AHA APP UP DATE REQUIRED
: The Aha application is an
older version which the unit can not support. Confirm that
the Aha application is the latest version.
7.3 Basic operations
Pause and play a content
Press [6
L
].
Selecting a content
Press [ E ] or [ F ].
Forward 30 seconds a content
Press and hold [
F
].
Backward 15 seconds a content
Press and hold [ E ].
“Likes” current content
Press [2
4
].
Press [2
4
] again to unvote.
“Dislikes” current content
Press [1 5 ].
Press [1
5
] again to unvote.
Station Search mode
1
Press [ 1 ] to enter Station Search mode.
2
Turn the volume knob to select station, then
press the knob.
3
Turn the volume knob to select a desired
content, then press the knob.
- To return to the station list, press [
6
].
Display Selection
Press [SCRL DISP] repeatedly to select an
information.
PROVIDER ; CONTENT INFO1 ; CONTENT INFO2 ;
CONTENT RATE ; STATION NAME ; CLOCK
Note
• You can not perform the above operations depending on
the selected station.
Error messages
• NO SKIPS
: No more skips are allowed now. Retry after a
while.
• NO STATIONS
: There is no receivable station.
• NO CONTENT : There is no receivable content.
• AHA UNAVAILABLE
: Your smartphone cannot be
connected to Aha Radio server.
• ACTN DISABLED
: You performed an unavailable operation.
• POOR GPS
: The GPS reception condition of your
smartphone is poor.
• NETWORK UNAVAILABLE
: The network has been
disconnected.
7.4 Calling a number in the content
You can call the phone number obtained from
the content from a smartphone or cell-phone
connected to this unit through Bluetooth.
1
Press [3].
“MAKE A CALL” appears.
2
Press the volume knob to make a call.
“CALL” appears.
Canceling the confirmative display
Press [ 6 ].
Disconnecting a call
Press [
Ú
].
Note
• You can not perform the above operations depending on
the selected station.
7.5 Aha source control
You can turn on/off the aha source.
1
Press [ 8 SRC] to select STANDBY .
2
Press the volume knob to enter Function
mode.
“FUNCTION” appears.
3
Turn the volume knob to select INITIAL SET ,
then press the knob.
4
Turn the volume knob to select AHA SRC , then
press the knob.
5
Turn the volume knob to select ON or OFF ,
then press the knob.
ON
: Turns on the aha source.
OFF
: Turns off the aha source.
6
Press and hold [
6
] to exit.