Kenwood KDC-BT755HD, Быстрый старт

Страница: 22 / 44

14
|
KDC-X797/ KDC-BT755HD
English
|
15
4.5 Direct Music Search using the
remote control (RC-406)
Not available if Random Play, KME-Light/ KMC
media, iPod playback is selected.
1
Press DIRECT to enter Direct Music Search
mode.
“– – –” appears.
2
Press the number buttons to enter the track
number.
3
Press [
E
] / [+
F
] to search for the music.
To cancel the Direct Music Search mode
Press [ 6 ].
4.6 Setting the skip search ratio
(Function of iPod, KME-Light/ KMC media)
You can change the ratio of skip performed as
mentioned in
<4.3 Music search> (page 13) .
1
Press the volume knob to enter Function
mode.
“FUNCTION” appears.
2
Turn the volume knob to select SETTINGS ,
then press the knob.
3
Turn the volume knob to select SKIP SEARCH ,
then press the knob.
4
Turn the volume knob to select the skip search
ratio from the following options then press
the knob.
0.5%
/
1%
/
5%
/
10% :
Sets the ratio of skip when
searching for a song in Music Search mode.
(Holding [
E
] / [
F
] for 3 seconds or longer skips
songs at 10% regardless of the selected ratio.)
5
Press and hold [
6
] to exit.
4.7 More information
Handling discs
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with
tape stuck on it.
• Do not use any accessories for the disc.
• Clean from the center of the disc and move
outward.
• Clean the disc with a dry silicon or soft cloth. Do not
use any solvents.
• When removing discs from this unit, pull them out
horizontally.
• Remove the rims from the center hole and disc
edge before inserting a disc.
Discs that cannot be used
• This unit can only play the CDs with .
• Discs that are not round.
• Discs with coloring on the recording surface or discs
that are dirty.
• You cannot play a Recordable/ReWritable disc that
has not been finalized. (For the finalization process
refer to your disc writing software, and your disc
recorder instruction manual.)
• 3-inch CD cannot be used. Attempt to insert using
an adapter can cause malfunction.
About Audio file
• Playable Audio file
: AAC-LC (.m4a), MP3 (.mp3), WMA (.wma), WAVE
(.wav)* 1
*1: Only for USB device.
• Playable disc media: CD-R/RW/ROM
• Playable disc file format: ISO 9660 Level 1/2, Joliet,
Long file name.
• Playable USB device file system: FAT12, FAT16, FAT32
Although the audio files are complied with the
standards listed above, the play maybe impossible
depending on the types or conditions of media or
device.
• Detailed information and notes about the playable
audio files are stated in an online manual on the
following site:
www.kenwood.com/cs/ce/audiofile/
4. CD/ USB/ iPod
About USB device
• This unit can play audio files stored on a USB mass
storage class device.
• Install the USB device in a place where it does not
interfere with your driving.
• You cannot connect a USB device via a USB hub and
Multi Card Reader.
• Make sure all important data has been backed up to
avoid losing the data.
• Connecting a cable whose total length is longer
than 5 m can result in abnormal playback.
• A USB connection cable, CA-U1EX (optional
accessory) is required for connecting a USB device.
About compatible iPod/iPhone
Made for
- iPod touch (4th generation)
- iPod touch (3rd generation)
- iPod touch (2nd generation)
- iPod touch (1st generation)
- iPod classic
- iPod with video
- iPod nano (6th generation)
- iPod nano (5th generation)
- iPod nano (4th generation)
- iPod nano (3rd generation)
- iPod nano (2nd generation)
- iPod nano (1st generation)
- iPhone 4S
- iPhone 4
- iPhone 3GS
- iPhone 3G
- iPhone
• Latest compatible list of iPod/iPhone.
For details, see:
www.kenwood.com/cs/ce/ipod
• Type of control available varies depending on the
type of connected iPod.
For details, see:
www.kenwood.com/cs/ce/ipod
• The word “iPod” appearing in this manual indicates
the iPod or iPhone connected to this unit with a
connection cable, KCA-iP102 (optional accessory).
• If you start playback after connecting the iPod, the
music that has been played by the iPod is played
first.
In this case, “RESUMING” appears without displaying
a folder name, etc. Changing the browse item will
display a correct title, etc.
• You cannot operate iPod if “KENWOOD” or “
å
”
displayed on iPod.
About “KENWOOD Music Editor Light” and
“KENWOOD Music Control”
• This unit supports the PC application “KENWOOD
Music Editor Light” (hereinafter “KME-Light”), and
Android™ application “KENWOOD Music Control”
(hereinafter “KMC”).
• When you use the audio file with database
information added by the “KENWOOD Music Editor
Light” or “KENWOOD Music Control”, you can search
for a file by title, album or artist name using Music
Search.
• “KENWOOD Music Editor Light” and “KENWOOD
Music Control” are available from the following web
site: www.kenwood.com/cs/ce/