Kenwood KDC-BT640U, Инструкция по эксплуатации

Страница: 15 / 164

ENGLISH
7
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Getting Started
Change the crossover type
1
Press
B
SRC repeatedly to enter STANDBY.
2 Press and hold number buttons 4 and 5 to enter crossover select.
The current crossover type appears.
3 Turn the volume knob to select “2WAY” or “3WAY”, then press the
knob.
4 Turn the volume knob to select “YES” or “NO”, then press the knob.
The selected crossover type appears.
• To cancel, press and hold .
• To adjust the selected crossover settings, see page 24.
CAUTION
Select a crossover type according to how the speakers are connected.
(Page 30, 31)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
Radio
• “ST” indicator lights up when receiving an FM stereo broadcast with
sufficient signal strength.
• The unit switches to FM alarm automatically when receiving an alarm
signal from FM broadcast.
Search for a station
1 Press
B
SRC repeatedly to select RADIO.
2
Press BAND repeatedly to select FM1/FM2/FM3/MW/LW.
3 Press
S
/
T
to search for a station.
You can store up to 18 stations for FM and 6 stations for MW/LW.
•
To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6).
Other settings
1 Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to select an item (page 8), then press the
knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press and hold to exit.
To return to the previous setting item, press .
JS_KWD_KDC_BT640U_EN_EN.indd 7 JS_KWD_KDC_BT640U_EN_EN.indd 7 6/7/2019 1:33:29 PM 6/7/2019 1:33:29 PM