Kenwood KDC-BT34U, Инструкция по эксплуатации

Страница: 6 / 21

4
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
GETTING STARTED
While in clock display screen...
Press and hold DISP SCRL to enter clock adjustment mode directly.
Then, perform step 4 to set the clock.
Set the initial settings
1 Press
B
SRC to enter STANDBY.
2 Press the volume knob to enter [FUNCTION] .
3
Turn the volume knob to make a selection (see the following table),
then press the knob.
4 Press and hold to exit.
To return to the previous setting item or hierarchy, press .
Default: XX
AUDIO CONTROL
SWITCH PREOUT REAR / SUB-W : Selects whether rear speakers or a subwoofer are
connected to the line out terminals on the rear (through an external
amplifier).
SP SELECT OFF / 5/4 / 6 × 9/6 / OEM : Selects according to the speaker size (5 inches
or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum
performance.
TUNER SETTING
PRESET TYPE NORMAL : Memorizes one station for each preset button in each band
(FM1/ FM2/ FM3/ MW/ LW). ; MIX : Memorizes one station for each preset
button, regardless of the selected band.
SYSTEM
KEY BEEP ON : Activates the keypress tone. ; OFF : Deactivates.
SOURCE SELECT
BUILT-IN AUX ON : Enables AUX in source selection. ; OFF : Disables. ( 6)
3
Select the display language and cancel the demonstration
When you turn on the power (or after you reset the unit), the display
shows: “SEL LANGUAGE” “PRESS” “VOLUME KNOB”
1
Turn the volume knob to select [ENG] (English) or [RUS] (Russian) , then
press the knob.
[ENG] is selected for the initial setup.
Then, the display shows: “CANCEL DEMO” “PRESS”
“VOLUME KNOB”
2
Press the volume knob.
[YES] is selected for the initial setup.
3 Press the volume knob again.
“DEMO OFF” appears.
Set the clock
1
Press the volume knob to enter [FUNCTION] .
2 Turn the volume knob to select [CLOCK] , then press the knob.
3 Turn the volume knob to select [CLOCK ADJUST] , then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
5 Turn the volume knob to select [CLOCK FORMAT] , then press the knob.
6 Turn the volume knob to select [12H] or [24H] , then press the knob.
7
Press and hold to exit.
To return to the previous setting item or hierarchy, press .
1
2
EN_KDC_BT34U_EN_3.indd 4 EN_KDC_BT34U_EN_3.indd 4 11/11/2013 2:02:25 PM 11/11/2013 2:02:25 PM