10
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
BLUETOOTH®
Improve the sound quality during a call
While talking on the phone...
1
Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to make a selection (see the following table),
then press the knob.
3
Press and hold
to exit.
To return to the previous setting item or hierarchy, press
.
Default:
XX
MIC GAIN
–20
— +
8
(
0
): The sensitivity of the microphone increases as the
number increased.
NR LEVEL
–5
—
–20
(
–10
): Adjust the noise reduction level until the least noise is
being heard during a phone conversation.
ECHO CANCEL
1
—
10
(
4
): Adjust the echo cancellation delay time until the least echo
is being heard during a phone conversation.
Text message notification
When the phone receives a text message, the unit rings and “SMS
RECEIVED” appears.
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
Use Voice Recognition
1
Press and hold
.
The connected phone (which has been paired the earliest) is
activated. However, if priority device is connected, pressing and
holding
activate the priority device.
( 12, DVC PRIORITY)
2
Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
iPhone.
Bluetooth mode operations
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to make a selection (see the following table),
then press the knob.
3
Press and hold
to exit.
To return to the previous setting item or hierarchy, press
.
CALL
HISTORY
1
Press the volume knob to select a name or a phone number.
• “I” indicates call received, “O” indicates call made, “M” indicates call
missed.
•
Press
DISP SCRL
to change the display category (NUMBER or NAME).
• “NO DATA” appears if there is no recorded call history.
2
Press the volume knob to call.
PHONE
BOOK
1
Turn the volume knob to select a name, then press the knob.
2
Turn the volume knob to select a phone number, then press the knob to call.
• If the phone supports PBAP, the phonebook of the connected phone is
automatically transferred to the unit when pairing. If the phone does not
support PBAP, “TRANSFER PB” appears. Transfer the phonebook manually.
(
12, TRANSFER PB)
• Contacts are categorized as: MO (mobile), HM (home), OF (office),
OT (others), GE (general)
• This unit can display only non-accent letters. (Accent letters such as “Ú” is
showns as “U”.)
• If the phonebook contains many contacts,
(
11, Select a contact by
name).
NUMBER
DIAL
1
Turn the volume knob to select a number (0 to 9) or character ( , #, +).
2
Press
S
/
T
to move the entry position.
Repeat
steps
1
and
2
until you finish entering the phone number.
3
Press the volume knob to call.
VOICE
Speak the name of the contact you want to call or the voice command to control
the phone functions.
(
Use Voice Recognition)
EN_KDC_BT34U_EN_f.indd 10
EN_KDC_BT34U_EN_f.indd 10
25/11/2013 2:56:20 PM
25/11/2013 2:56:20 PM
