Kenwood KDC-BT34U, Инструкция по эксплуатации

Страница: 17 / 21

15 ENGLISH |
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
TROUBLESHOOTING
Symptom Remedy
Sound cannot be heard. • Adjust the volume to the optimum level.
• Check the cords and connections.
“PROTECT” appears and
no operations can be
done.
Check to be sure the terminals of the speaker wires are
insulated properly, then reset the unit. If this does not solve
the problem, consult your nearest service center.
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on
the display is incorrect.
Clean the connectors. ( 2)
The unit does not work at
all.
Reset the unit. ( 3)
• Radio reception is poor.
• Static noise while
listening to the radio.
• Connect the antenna firmly.
• Pull the antenna out all the way.
“NA FILE” appears. Make sure the disc contains supported audio files.
( 14)
“NO DISC” appears. Insert a playable disc into the loading slot.
“TOC ERROR” appears. Make sure the disc is clean and inserted properly.
“PLEASE EJECT” appears. Reset the unit. If this does not solve the problem, consult your
nearest service center.
Disc cannot be ejected.
Press and hold
M
to forcibly eject the disc. Be careful not
to drop the disc when it is ejected. If this does not solve the
problem, reset the unit.
( 3)
“READ ERROR” appears. Copy the files and folders onto the USB device again. If this
does not solve the problem, reset the USB device or use
another USB device.
“NO DEVICE” appears. Connect a USB device, and change the source to USB again.
Symptom Remedy
“COPY PRO” appears. A copy-protected file is played.
“NA DEVICE” appears. Connect a supported USB device, and check the connections.
“NO MUSIC” appears. Connect a USB device that contains playable audio files.
“iPod ERROR” appears. • Reconnect the iPod.
• Reset the iPod.
Noise is generated. Skip to another track or change the disc.
Tracks do not play back as
you intended them to play. Playback order is determined when files are recorded.
“READING” keeps flashing. Do not use too many hierarchical levels or folders.
Elapsed playing time is not
correct. This is caused by how the tracks are recorded.
Correct characters are not
displayed (e.g. album
name). This unit can only display uppercase letters, numbers, and a
limited number of symbols. Uppercase Cyrillic letters can also
be displayed if
[RUSSIAN SET] is set to [РУССКИЙ BКЛ] .
( 5)
Bluetooth®
No Bluetooth
device is detected. • Search from the Bluetooth device again.
• Reset the unit.
( 3)
Pairing cannot be
made. • Make sure you have entered the same PIN code to both the
unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. ( 9)
“DEVICE FULL”
appears. The number of registered devices has reached its limit.
Retry after deleting an unnecessary device. ( 12, DEVICE
DELETE)
Echo or noise
occurs. • Adjust the microphone unit’s position. ( 8)
• Check the [ECHO CANCEL] setting. ( 10)
EN_KDC_BT34U_EN_001B.indd 15 EN_KDC_BT34U_EN_001B.indd 15 27/12/2013 2:06:26 PM 27/12/2013 2:06:26 PM