Kenwood KDC-8024, Инструкция по эксплуатации

Страница: 38 / 64

Selecting the CD displayed in the DNPS of the CDs set in the
Disc changer.
1
Enter DNPP mode
Press the [DNPP] button on the remote.
When "DNPP" is displayed the DNPS display in order.
Forward / Reverse display
Press the [DISC–] or [DISC+] button.
2
When the disc you want is displayed
Press the [OK] button on the remote.
The disc being displayed is played.
Canceling the DNPP mode
Press the [DNPP] button on the remote.
DNPP (Disc Name Preset Play)
(Function of disc changers with remote)
• When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
• Media that you can attach names to
- Internal CD player: 30 discs.
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
• The name of a CD can be changed by the same operation you
used to name it.
Attaching a title to a CD.
1
Play the disc you want to attach a name to
A title can't be attached to a MD.
2
Enter name set mode
Press the [NAME.S] button for at least 2 seconds.
"Name Set" is displayed.
3
Move the cursor to the enter character position
Press the [
4
] or [
¢
] button.
4
Select the character type
Press the [2] — [4] button.
Each time the button is pressed the character type switches as
shown below.
Character type Button
Alphabet (Upper case/ Lower case) [2] ("A • a")
Numbers and symbols [3] ("1")
Special characters (Accent characters) [4] ("CHAR")
5
Select the characters
Press the [FM] or [AM] button.
Characters can be entered by using a remote with a number button.
Example: If "DANCE" is entered.
Character Button Times pressed
"D" [3] 1
"A" [2] 1
"N" [6] 2
"C" [2] 3
"E" [3] 2
6
Repeat steps 3 through 5 and enter the name.
7
Exit name set mode
Press the [NAME.S] button.
Disc Naming (DNPS)
CD/MP3/WMA/External disc control features
— 38 —
English
KDC-PSW9524_U.S_r5.pg 02.12.13 2:05 PM Page 38