18
|
KDC-BT73DAB/ KDC-BT53U/ KDC-5057SD
"Sound Realizer"
Virtually makes the sound more realistic
using the DSP.
"
OFF
"/ "Level1"/ "Level2"/ "Level3"
"Sound Elevation"
Virtually raises the sound field using
the DSP.
"
OFF
"/ "Low"/ "Middle"/ "High"
"Volume offset"
Sets each source’s volume as a difference
from the basic volume.
"–8" — "
0
" (AUX: "–8"— "+8")
"Rear Mute"
Sets the Rear channel Mute.
"ON"/ "
OFF
"
"SubWoofer Mute"
Sets the Subwoofer Mute.
"ON"/ "
OFF
"
"Audio Preset"
You can register the values set the Audio
control items.
Refer to
<5-11. DSP preset recall> (page
.
"Bass Boost"
[4]
Sets the Bass Boost level in 3 steps.
"
OFF
"/ "Level1"/ "Level2"/ "Level3"
"Loudness"
[4]
Makes the sounds at high and low
frequencies louder.
"
OFF
"/ "Low"/ "High"
"Balance"
Adjusts left/right speaker balance.
"Left15" — "
0
" — "Right15"
"Fader"
Adjusts front/rear speaker balance.
"Rear15" — "
0
" — "Front15"
(
Colored text
: Factory setting)
[1]
You can select for each source.
[2]
"User": The Equalizer curve set in the section
Manual equalizer control> (page 19)
is recalled.
[3]
This function is not effective for the Tuner and Digital
radio source.
[4]
Displayed only when "DSP Set" is set to "Through".
[5]
Audio file source only
5
Select a value using [Control] knob.
Exiting from the Function setting mode
Press and hold [
1
/
6
].
When you selected "iPod" for "Preset Equalizer"
•
When you selected "iPod" for "Preset Equalizer", next select
an equalizer curve. Select a desired equalizer curve using
[Control] knob from among 22 equalizer curves displayed
after you selected "iPod".
5-1. Audio control
You can adjust the audio control items.
1
Press [SRC] to select a source other than
Standby ("STANDBY").
Refer to
2
Press [Control] knob.
Enters the Function setting mode.
3
Select "Audio Control" using [Control] knob.
For how to use [Control] knob, refer to
4
Select a audio control item using [Control]
knob.
Display
Overview
"SubWoofer Level"
You can set subwoofer level.
"–15" — "0" — "+15"
"Preset Equalizer"
[1][4]
Select from among preset equalizer curves
to set the sound quality.
"
User
"
[2]
/ "Natural"/ "Rock"/ "Pops"/
"Easy"/ "Top 40"/ "Jazz"/ "Powerful"/
"iPod"(During iPod source only)
"Manual Equalizer""
[1][4]
Set the equalizer curve manually.
Refer to
<5-2. Manual equalizer control>
"Pro Setup"
"DSP Set"
Turn on/off the DSP function.
"Bypass"
: Disables the DSP function.
"
Through
"
: Enables the DSP function.
"Car Type"
[4]
To get clear sound, set the sound
environment according to the location and
size of physically installed speakers with
reference to the followings:
<5-3. Car type selection> (page 19)
<5-4. Speaker setting> (page 20)
<5-5. X’Over setting> (page 20)
<5-6. Listening position setting> (page
<5-7. Delay time control> (page 21)
<5-8. Channel level fine adjustments>
<5-9. Resetting of DTA Settings> (page
"Speaker Setting"
[4]
"X’Over"
[4]
"DTA Settings"
[4]
"Sound Enhancements"
[4]
"Supreme"
[5]
Turns ON/OFF the Supreme function.
Can be set while Audio file source of USB/
CD and iPod source.
"
ON
"/ "OFF"
"HIGHWAY-SOUND"
[3]
Compensates the low volume or bass
sound being lost by road noises to make
vocal sound clearer.
"
OFF
"/ "Low"/ "Middle"/ "High"
"Space Enhancer"
[3]
Virtually enhances the sound space using
the DSP.
"
OFF
"/ "Small"/ "Medium"/ "Large"
5. DSP settings (KDC-BT73DAB, KDC-BT53U)
Содержание KDC-5057SD
