Kenwood KDC-5057SD, Инструкция по эксплуатации

Страница: 19 / 82

English
|
19
5-3. Car type selection
You can compensate the delay of the sound arrival
time by selecting your environment from the car
types.
1
Press [SRC] to select a source other than
Standby ("STANDBY").
Refer to <Source selection> (page 14) .
2
Press [Control] knob.
Enters the Function setting mode.
3
Select "Audio Control" > "Pro Setup" > "Car
Type" using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13) .
4
Select a car type using [Control] knob.
Display Car type
"OFF" Not compensating.
"Compact" Compact car
"Sedan" Sedan
"Wagon" Station wagon
"Minivan" Minivan
"SUV" Sport-utility vehicle
"Passenger Van" Passenger van
Exiting from the Function setting mode
Press and hold [
1
/
6
].
To set the delay time finely
•
You can compensate the distances in more details by using
<5-7. Delay time control> (page 21) function.
5-2. Manual equalizer control
You can adjust the equalizer curve manually.
1
Press [SRC] to select a source other than
Standby ("STANDBY").
Refer to <Source selection> (page 14) .
2
Press [Control] knob.
Enters the Function setting mode.
3
Select "Audio Control" > "Manual Equalizer"
using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13) .
4
Select a equalizer control item using [Control]
knob.
Display Description Range
"Gain" Adjust the gain of each band.
-9 – 0 – +9 dB
"Q Factor" Adjust Q of each band.
1.35/ 1.50 / 2.00
"Bass EXT" Adjust the gain of lower
frequencies than 62.5 Hz to the
level equivalent to 62.5 Hz.
" OFF "/ "ON"
(
Colored text
: Factory setting)
When "Bass EXT" and "Q Factor" are selected, skip
step 5.
5
Select a Band using [Control] knob.
"BAND1"; 62.5 Hz, "BAND2"; 100 Hz,
"BAND3"; 160 Hz, "BAND4"; 250 Hz,
"BAND5"; 400 Hz, "BAND6"; 630 Hz,
"BAND7"; 1 kHz, "BAND8"; 1.6 kHz,
"BAND9"; 2.5 kHz, "BAND10"; 4 kHz,
"BAND11"; 6.3 kHz, "BAND12"; 10 kHz,
"BAND13"; 16kHz
6
Select a value using [Control] knob.
Exiting from the Function setting mode
Press and hold [
1
/
6
].
When the "Manual Equalizer" item is not displayed
•
This function is not available when "iPod" is selected for
"Preset Equalizer".
5. DSP settings (KDC-BT73DAB, KDC-BT53U)