Kenwood FGZ000UF2, Руководство по обслуживанию

Страница: 16 / 52

FGZ000UF2
16
No. Item Screen Operation Specification Remarks
8 NIGHT NAVI (RGB) NAVI screen, with minimum brightness set.
q
White 100% input, with NAVI (RGB) input.
q
Night screen No OSD Contrast
→
Default
brightness Tint
→
Default
Color depth
→
Default
9 SOFT SW Graphic Numeric displays on four corners of the
q
Touch panel operation screen. When a number is pressed, the
pressed number is displayed on the
screen in a large size.
10 HARD SW Graphic
q
By the switch information correspond-
q
Hard switch (Hard switch ing to the external switch, the tint is
confirmation switched each time the switch is pressed.
screen)
w
The key illumination is forced to turn on.
11 STATUS Graphic
q
Displays internal temperature of LCD
q
Heater operation
w
Displays voltage
w
Confirmation on
e
Displays version
excess current
r
Displays destination
e
µ
-com version
r
Destination
12 REAR Rear camera The “marker adjustment signal” is
q
Rear image confirmation image connected with the rear camera each
w
Guide line adjustment time the screen is pressed. Using this
the guideline position is adjusted.
13 CONNECT Graphic
●
Vehicle unit
●
Vehicle Unit (Condition)
q
Confirmation on the
q
Integrated ECU By monitoring the communication condition,
vehicle unit
w
Meter “normal” or “abnormal” is displayed.
w
Confirmation on the
e
Air-conditioner Alongside the vehicle unit items, the condi
connection unit
●
Vehicle unit tions of the CAB BUS line are displayed.
e
Confirmation on the
q
Audio (F-BUS) When a line is cut (one line out of two
vehicle signal
w
NAVI communication lines), “abnormal” is displayed.
r
Confirmation on
e
Rear camera In other cases, “normal” is displayed.
vehicle CAN
r
TV tuner * When two lines re cut, this cannot be
t
AUX detected and “normal” is displayed.
●
Vehicle signal * On the CAN format, the communication is
q
Illumination possible with only one communication line.
w
Illumination PWM This may cause the unit to display “normal”.
e
IGN
●
Vehicle unit (Connection)
r
Parking The connection condition is monitored and
t
Vehicle speed “connected” and “not connected” are displayed.
y
Reverse
●
Vehicle signal
The terminal conditions are displayed.
TEST MODE