Kenwood FDP22, Инструкция по эксплуатации

Страница: 12 / 144

7
Troubleshooting Guide
Problem Cause Solution
The processor will
not operate. No Power. Check processor is plugged in.
Bowl not fitted to power
unit correctly.
The processor will not operate
if the bowl or lid are not fitted
correctly into the interlock.
Bowl lid not locked on
correctly.
Check that the bowl and lid
are aligned and interlocked
correctly.
Processor stops
during processing. Processor overloaded/
maximum capacities
exceeded. Check maximum capacities stated
in the recommended usage chart.
Lid unlocked. Check lid is locked on correctly.
Can not fit the bowl
to the base, with the
lid fitted. The On/off switch is in
the ‘On’ position. Move the switch to the ‘off’
position.
Food not exiting the
outlet of the express
serve. The slinger plate is not
fitted under the grating/
slicing disc. Fit the slinger plate.
Slice or grated food
damaged by the knife
blade. Operating with the knife
blade and disc fitted in
the bowl. Remove the knife blade before
using the grating/slicing disc.
Unit unstable/
heavy vibrations and
movement. Processing dough for too
long.
Processor overloaded/
maximum capacities
exceeded.
Use the handle on the lid to
support if the appliance starts to
move on the worktop.
Do not process doughs for
longer than 30 seconds and do
not exceed maximum quantity
recommended in the usage chart.
Re-kneading dough. Re-knead by hand only.
Re-kneading in the bowl is not
recommended as it may cause the
processor to become unstable.
Sticky fruit/ingredients
such as dates being
processed. For best results use 'Pulse' first to
break down the ingredients and
then use continuous operation.
Heavy splashing or
ingredients ejected
from the feed tube. Pusher not fitted. Always fit the pusher when
processing dough, pastry and
cakes to prevent splashing from
the feed tube .
Poor performance of
the knife blade and
disc. Refer to the Hints and tip section and follow the
recommendation in the usage chart.