63
Chapter 6:Specifying and Using Disc or Track Data
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
÷
The type of characters (capital letters or numbers/
symbols) is switched each time the
CHARAC.
button is pressed.
Keyboard remote (DV-5900M only)
÷
To input a symbol, press and hold the
SHIFT
button while press the desired numeric/symbol
button.
4.
Press the
ENTER
button.
c :
To change a title
(Standard remote/Keyboard remote)
Operation procedure
1.
Make the unit ready for character input.
With the standard remote:
Perform steps
1
to
5
of “
Assigning Title
”.
Œ
With the keyboard remote:
Perform steps
1
to
4
of “
Assigning Title
”.
„
2.
Press the cursor left, right button to move the cursor
to the character to be changed.
3.
Enter the title name using the character input buttons.
÷
No character can be changed if 20 characters have
already been input. In this case, delete unnecessary
characters then enter the desired correction
characters.
÷
If the title to be changed is too long to be displayed
on the display section, press the cursor left/right
button to scroll the display so that the characters
hidden until then appear.
÷
A title name can be registered using up to 20
characters.
÷
If you commit a mistake in the character button
input, press the
DELETE
button and restart the
input from the beginning.
÷
If a desired character is not provided on the remote
control buttons, input the character as follows.
Press the
CHARAC.
4
,
¢
(down/up) buttons
or rotating the
DISC
knob on the main unit until
the desired character is displayed in the flashing
cursor position. Then, press the
SET
button.
Standard remote
d :
To delete a title
(Standard remote/Keyboard remote)
Operation procedure
1.
Make the unit ready for character input.
With the standard remote:
Perform steps
1
to
5
of “
Assigning Title
”.
Œ
With the keyboard remote:
Perform steps
1
to
4
of “
Assigning Title
”.
„
2.
Press the cursor left, right button to move the cursor
to the character to be deleted.
3.
Press the
DELETE
button.
4.
Press the
ENTER
button.
