(No.WA063<Rev.003>)16/31
4.2
Production Test Mode
Press and hold [1] key and [3] key and reset.
4.2.1 Default condition when the mode is started
It shall be same as normal RST start in other settings than the following.
4.2.2 Mode structure
Some Test Modes change according to the current source.
The following table shows the current source in Set and the related test mode status.
4.2.3 Mode content
Syscom shall display the following information after entering this mode. The operation shown below shall be workable.
4.2.4 STANDBY Test Mode Specification
Details
Difference in action
Period to prohibit TEL/LINE MUTE immediately after activation
(normally 10seconds)
1 second
CD Mecha Initialize Action
Prohibited
Write-in to E2PROM when detecting a DC error
Prohibited
Demo Mode ON/OFF Setting Menu
Prohibited
Power supply during ACC OFF (Back Up On)
MUTE terminal turns OFF after 2 seconds
BEEP sound
Beep with short-pressing in any functions
Various setting value Volume
33 (-10dB)
BASS BOOST/LOUDNESS
OFF
EQ
NATURAL
Fader/Balance
Center
Volume Offset
-6: for only SXM source
0: for the other sources
DEMO Mode Setting
OFF
AUX Setting (Built-In-Aux)
ON
BT speaker Setting
ALL
Model source
Test mode
POWER OFF
-
Standby
STANDBY Test mode
TUNER
TUNER Test mode
SXM
SXM Test Mode
CD
CD Test mode
BT
BT Test mode
USB
USB Test mode
AUX
-
Display content
Details
All lights ON
Operation
Display content
Details
1 (Toggle)
Syscom version
display
xxx: Version (Micom)
BT Module version
display
BT Module version display
Media control part
version display
Media control part version display
All lights ON
All lights ON (Switch with other display)
S
0
1
S
Y
-
B
T
X
X
X
X
S
A
:
D
E
M
I
x
x
x
x