background image

ENGLISH

15

Data Size: 

B6L (182 mm x 128 mm)

Book Size: 

B6L (182 mm x 128 mm)

BLUETOOTH®

•  This unit supports Secure Simple Pairing (SSP).
•  Up to 10 devices can be registered (paired) in total.
•  Once the pairing is completed, the Bluetooth device will remain 

registered in the unit even if you reset the unit. To delete the paired 
device,   

19

, [

DEVICE DELETE

].

Once pairing is completed, Bluetooth connection is established 
automatically. “BT1” and/or “BT2” indicator on the faceplate lights up.

•  A maximum of two Bluetooth phones and one Bluetooth audio device 

can be connected at any time.

•  Some Bluetooth devices may not automatically connect to the unit 

after pairing. Connect the device to the unit manually.

•  Refer to the instruction manual of the Bluetooth device for more 

information.

Auto Pairing

When you connect iPhone/ iPod touch/ Android device to the USB input 
terminal, pairing request (via Bluetooth) is automatically activated.

Press the volume knob to pair once you have confirmed the device 
name.

Automatic pairing request is activated only if:
– Bluetooth function of the connected device is turned on.
– [

AUTO PAIRING

] is set to [

ON

]. (  

19

)

– KENWOOD MUSIC PLAY application is installed on the Android device 

(  

10

) and [

BROWSE MODE

] is selected (  

11

).

Connect with a remote device by One-touch (NFC)

Near Field Communication (NFC) enables short-range wireless 
communication between the unit and remote devices.
By holding an NFC-compatible remote device near to the N-Mark on 
the unit, the unit and remote device proceed to complete pairing and 
established the BLUETOOTH connection automatically.

Activate the NFC function on the remote device.

 

Refer to the instruction manual of the remote device for more 
information.

Hold the remote device near to the N-Mark on the unit.

 

The device vibrates when pairing is completed.

 

•  To disconnect, hold the remote device near to the N-Mark on the unit 

again.

•  This unit only can recognize and connect to one NFC-compatible device 

at a time.

JS_KWD_DPX_7000DAB_XN_EN_1.indd   15

JS_KWD_DPX_7000DAB_XN_EN_1.indd   15

26/11/2015   11:11:22 AM

26/11/2015   11:11:22 AM

Содержание DPX-7000DAB





































Отзывы: