Connection/Installation
92
Ñ
Removing the trim plate
(Except DDX9705S)
1) Engage the catch pins on the extraction key
(accessory
5
) and remove the two locks on
the lower level.
Lower the trim plate (accessory
8
) and pull it
forward as shown in the figure.
5
8
Lock
Catch
NOTE
• The trim plate can be removed from the top side
in the same manner.
2) When the lower level is removed, remove the
upper two locations.
Ñ
Removing the unit
(Except DDX9705S)
1) Remove the trim plate by referring to step 1 in
"Removing the trim plate".
2) Insert the two extraction key (accessory
5
)
deeply into the slots on each side, as shown.
5
3) Lower the extraction key toward the bottom,
and pull out the unit halfway while pressing
towards the inside.
NOTE
• Be careful to avoid injury from the catch pins on
the extraction key.
4) Pull the unit all the way out with your hands,
being careful not to drop it.
Ñ
Securing the USB extension
cable
Secure the USB extension cable with insulating
tape or the like so that its connectors are not
disconnected.
!B5A-2485-00_18DDX_K_En.indb 92
2018/02/20 18:25
Содержание DDX9018BTS
Страница 108: ... B5A 2485 00_18DDX_K_En indb 108 2018 02 20 18 25 ...