Kenwood DDX9018BTS, Инструкция по эксплуатации

Страница: 79 / 110

Controlling Audio
79
English
■ [
Tweeter
]
(Only for Front)
You can set up the tweeter when you are
selecting front speakers.
None, Small, Medium, Large
■ [
X
ʼ
over
]
Display the speaker crossover setup screen.
You can adjust the crossover frequency that
was set automatically when you selected the
speaker type.
For details, see
Crossover network setup
(P.79)
Ñ
Crossover network setup
You can set the crossover frequency of
speakers.
1
Touch
[
X
ʼ
over
]
.
2
Touch the speaker to set up.
3
Set each parameter as follows.
■ [
HPF FREQ
]
High Pass Filter adjustment. (When Front or
Rear is selected on the Speaker Select screen)
■
[
LPF FREQ
]
Low Pass Filter adjustment. (When
Subwoofer is selected on the Speaker Select
screen)
■
[
Slope
]
* 1
Set a crossover slope.
■ [
Gain
]
Adjust the gain of the front speaker, rear
speaker, or subwoofer.
■ [
TW Gain
]
*
2
Adjust the tweeter level. (When Front is
selected on the Speaker Select screen)
■ [
Phase Inversion
]
* 3
Set the phase of subwoofer output.
Check
[
Phase Inversion
] to shift the phase
180 degrees. (When Subwoofer is selected
on the Speaker Select screen)
*
1
Only when “LPF FREQ”/“HPF FREQ” is set to
a mode other than “Through” in
[
X
ʼ
over
]
.
*
2
Only when “Tweeter” is set to “Small”,
“Medium”, “Large” in
[
Speaker Setup
]
.
*
3
Only when “Subwoofer” is set to a mode
other than “None” in
[
Speaker Setup
]
.
Controlling General Audio
1
Press the
[
MENU
]
button.
h h
Popup menu appears.
2
Touch
[
Audio
]
.
h h Audio screen appears.
3
Touch
[
Fader / Balance
]
.
4
Set each parameter as follows.
■
[
Fader / Balance
]
Adjust the volume balance around the
touched area.
[
C
]
and
[
D
]
adjust the right and left volume
balance.
[
R
]
and
[
S
]
adjust the front and rear volume
balance.
■ [
Center
]
Clear the adjustment.
!B5A-2485-00_18DDX_K_En.indb 79 2018/02/20 18:25