Kenwood DDX9018BTS, Инструкция по эксплуатации

Страница: 80 / 110

Controlling Audio
80
Equalizer Control
You can adjust equalizer by selecting the
optimized setting for each category.
1
Press the
[
MENU
]
button.
h h Popup menu appears.
2
Touch
[
Audio
]
.
h h Audio screen appears.
3
Touch
[
Equalizer
]
.
4
Touch the screen and set the Graphic
Equalizer as desired.
■
Gain level (area in dotted frame)
Adjust the gain level by touching each
frequency bar.
You can select a frequency bar and adjust its
level by
[
R
]
,
[
S
]
.
■
[
Preset Select
]
Display the screen for selecting the preset
equalizer curve.
(P.80)
■ [
Memory
]
Saves the adjusted equalizer curve as “User1”
to “User4”.
(P.80)
■ [
Initialize
]
Initialize (flatten) the current EQ curve.
■ [
ALL SRC
]
Apply the adjusted equalizer curve to all
sources. Touch
[
ALL SRC
]
and then touch
[
OK
]
on the confirmation screen.
■ [
Bass EXT
]
(Bass Extend Settings)
When turned on, the frequencies lower than
62.5 Hz is set to the same gain level (62.5 Hz).
■ [
SW Level
]
Adjust the subwoofer volume. This setting
is not available when Subwoofer is set to
“None”. See
Speaker/ X’over setup (P.78)
.
Ñ
Recall the EQ curve
1
Touch
[
Preset Select
]
.
2
Select an EQ curve.
NOTE
•
[
iPod
]
is available only for the iPod source.
Ñ
Save the EQ curve
1
Adjust the EQ curve.
2
Touch
[
Memory
]
.
3
Select where to save.
!B5A-2485-00_18DDX_K_En.indb 80 2018/02/20 18:25