ENGLISH
49
CONNECTION/INSTALLATION
❏
Supplied accessories for installation
1
Wiring harness x 1
2
Extension wire x 1
3
Flat head screws (M5 x 7 mm) x 6
4
Round head screws (M5 x 6 mm) x 6
5
Antenna extention cable x 1
6
Steering Remote cable x 1
7
Microphone x 1
8
Fixture for HDMI/MHL connector x 1
9
Screws for the fixture (M2.6 x 6 mm) x 1
❏
Installation procedure
1
To prevent a short circuit, remove the key
from the ignition and disconnect the
·
battery.
2
Make the proper input and output wire
connections for each unit.
3
Connect the speaker wires of the wiring
harness.
4
Connect the wiring harness wires in the
following order: ground, battery, ignition.
5
Connect the wiring harness connector to
the unit.
6
Install the unit in your car.
• Make sure that the unit is installed securely
in place. If the unit is unstable, it may
malfunction (e.g., the sound may skip).
7
Reconnect the
·
battery.
8
Press the reset button.
9
Configure
<Initial Setup>
. (page 4)
Installing the unit
❏
Installation on Toyota Car using
Brackets
Car Bracket
3
or
4
3
or
4
• Select the appropriate type of screw for the
mounting bracket: flat head (
3
) or round head
(
4
).
DDX̲Mid̲R̲200mm.indb 49
2014/01/29 19:00
Содержание DDX771WBT
Страница 64: ...DDX Mid R 200mm indb 1 2014 01 29 19 00 ...