84
CONNECTION/INSTALLATION
❏
Connecting the GPS antenna
Connect the GPS antenna (
7
) to the GPS terminal.
•
To install the GPS antenna, fix the metal plate
(
8
) firmly on the dashboard, then place the GPS
antenna (
7
) on the metal plate (
8
).
– Clean the dashboard or other surface
beforehand.
– Install the GPS antenna (
7
) inside of the car, as
horizontally as possible to allow easy reception
of the GPS satellite signals.
– You can bend the metal plate (
8
) to conform to
a curved surface, if necessary.
7
7
8
•
Depending on the type of car, reception of the
GPS satellite signals might not be possible with an
internal installation.
•
Install this GPS antenna in an area away from any
antennas that are used with CB radios or satellite
televisions.
•
The GPS antenna should be installed at a position
at least 30 cm (12 inches) from mobile phone or
other transmitting antennas.
•
The above types of communication may interfere
with signals from the GPS satellite.
•
Painting the GPS antenna with (metallic) paint
may cause reduced performance.
Removing the unit (Only for
DDX9903S/DDX9703S/DDX6903S/
DDX6703S/DDX9716BTS)
❏
Removing the trim plate
1
Engage the catch pins on the extraction
key (
3
) and remove the two locks on the
lower part. Lower the frame and pull it
forward.
3
2
2
Remove from the upper two catches.
•
The frame can be removed from the top side in
the same manner.
❏
Removing the unit
1
Remove the trim plate. (See the left
column.)
2
Insert the two extraction keys (
3
), then
pull them as illustrated so that the unit can
be removed.
3
•
Be careful to avoid injury from the catch pins on
the extraction key.
