38
DDX6027/6027Y/7017
DDX7037/7047/7067
4. Flicker Adjustment (X35: VR203)
Condition (As usual)
Video source: VIDEO
Video: Luster white 30~50%
BRIGHT: MAX
MODE: ZOOM
Adjustment Procedure
1. Set to the above condition.
2. Vary VR203 and adjust so that the side width that appear
on screen top would become smallest.
5. Horizontal Display Start Position and
OSD Display Position Adjustment
Next
Cancel
########
∗∗
OSD
∗∗
Screen adjustment key: HPOSI
Go to te next adjustment screen
OSD adjustment key
Return to the menu screen
Horizontal screen position adjustment
Screen Adjustment Key (HPOSI)
: Horizontal display start position adjustment of entire screen
OSD Adjustment Key
: Horizontal display start position adjustment of OSD only
About the video for adjustment screen
DVD: Monoscope (TDV-540A, Title : 2, Chapter : 16)
TV: Monoscope
VIDEO1: Monoscope
Navigation: Input KNA-DV3200
∗
For NTSC area destination: NTSC video
For PAL area destination : PAL video
∗
As for TV tuner Box, use the TV Tuner Box suited for each
destination.
∗
NAVI screen is NAVI Menu Screen.
Adjustment Procedure
1. Press HPOSI on Test Mode Menu Screen.
2. Adjust HPOSI display start position of the following five;
Graphic/DVD/TV/VIDEO/Navigation.
3-1. Graphic
Use OSD key to adjust so that background is not seen on
both sides of screen.
HPOSI key is not to be used. Pay attention not to used it, as
it can be operated on.
NG
NG
OK
3. Freerun Frequency Adjustment (X35: VR301)
Measurement Location
Adjustment
No.
Adjustment Method
Timing controller
1DIN
2DIN
Location
Adjustment Value
IC301
X35-448
X35-458
1
Set TP of NVD TP as no input
NVD (21pin)
TP363B
TP55
and connect to PON3.3V.
Set TP of NHD TP as no input and
NHD (22pin)
TP304B
TP17
connect to PON3.3V.
2
Adjust frequency of HSYNC with
NDSH (9pin)
TP307B
TP106
VR301
15.734kHz
±
0.01kHz
a frequency counter.
(NTSC type)
15.625kHz
±
0.01kHz
(PAL type)
ADJUSTMENT