52
SETTINGS
SETTINGS
❏
Locking the settings
You can lock the settings to prevent them from
being changed.
•
is shown beside the settings that can be
locked.
1
Display the
<SETUP Memory>
screen.
(Page
51)
2
To unlock the setting:
Press
[Unlock]
.
❏
Updating the system
You can update the system by connecting a USB
device containing an update file.
• To update the system, visit <http://www.
kenwood.com/cs/ce/>.
1
Create an update file, copy it to a USB
device, and connect the device to the unit.
• To connect a USB device, see page
62 .
2
Display the
<System Information>
screen.
On the
<HOME>
screen:
• Press [
K
] repeatedly to change the page on
the
<System>
menu screen.
3
<Application
Version>
Updates the system
application.
<System Version>
Updates the system.
<Bluetooth
Version>
Updates the Bluetooth
application.
<DAB module
Version>*
1
Updates the Digital Radio
(DAB) module application.
<Vehicle Adaptor
Version>*
2
Updates the system of the
equipment connected to
the External I/F terminal
(Page
63).
It may take a while.
If the update has been completed successfully,
“Update Completed” appears. Reset the unit.
• Do not disconnect the USB device while updating.
• If the update has failed, turn the power off and
then on, and retry the update.
• Even if you have turned off the power during the
update, you can restart the update after the power
is turned on. The update will be performed from
the beginning.
*
1
Only for DDX5016DAB.
*
2
Only for DDX5016DAB/DDX5016BT.
❏
Adjusting the touch position
You can adjust the touch position on the touch
panel if the position touched and the operation
performed do not match.
1
Display the
<Touch Panel Adjust>
screen.
On the
< <HOME>
screen:
• Press [
K
] repeatedly to change the page on
the
<System>
menu screen.
2
Touch the center of the marks at the lower
left and at the upper right as instructed.
• To reset the touch position, press
[Reset]
.
• To cancel the current operation, press
[Cancel]
.
DDX̲Mid̲E.indb 52
DDX̲Mid̲E.indb 52
2015/12/24 14:02
2015/12/24 14:02