Kenwood DDX318BT, Инструкция по эксплуатации

Страница: 29 / 64

Rear view camera
Install the rear view camera (separately purchased) in
the appropriate position according to the instructions
supplied with the rear view camera.
Connecting a rear view camera
See page 46 for more information.
• To use the rear view camera, a reverse lead (REVERSE)
connection is required. (Page 45)
Using the rear view camera
• For rear camera settings, see <Rear Camera> on
page 37.
To display the rear view camera screen
The rear view screen is displayed by shifting the gear
to the reverse (R) position when
<Rear Camera
Interruption> is set to [ON] . (Page 37)
• A caution message appears on the screen. To
remove the caution message, touch the screen.
You can also display the picture from the rear view
camera manually without shifting the gear to the
reverse (R) position.
On the pop-up short-cut menu, touch as follows:
Other External Components Other External Components
AV-IN
Connecting an external component
See page 46 for more information.
Starting playback
1
Select “AV-IN” as the source.
2
Turn on the connected component and
start playing the source.
Changing the AV-IN name
You can change the AV-IN name displayed on the
source control screen.
• This setting does not affect the source name
displayed on the Home screen.
1
Display the <VIDEO Mode> screen.
On the source control screen, touch as follows:
2
Select an AV-IN name.
Operations while the camera screen is
displayed
To adjust the picture
Touch the area shown below.
Video menu control is shown. For details, see “Video
menu control operations” on page 12.
• To exit video menu control, touch the same area
again.
To display parking guide line
Set <Parking Guidelines> to [ON] (Page 37) or
touch the area shown below.
• To close the parking guidelines, touch the same area
again.
To exit the camera screen
Press HOME on the monitor panel or touch the area
shown below.
25 ENGLISH
00_DDX318BT_EN_ENG.indb 25 00_DDX318BT_EN_ENG.indb 25 13/6/2017 9:43:26 AM 13/6/2017 9:43:26 AM