ENGLISH
59
REMOTE CONTROLLER
REMOTE CONTROLLER
Overview
Optional Remote Controller KNA-RCDV331 is
designed for controlling this unit. Refer to the
instruction manual that comes with the remote
controller.
V
Caution:
• Put the Remote Controller in a place where it will
not move during braking or other operations. A
dangerous situation could result if the Remote
Controller falls down and gets wedged under the
pedals while driving.
• Do not leave the battery near fire or under direct
sunlight. A fire, explosion or excessive heat
generation may result.
• Do not recharge, short, break up or heat the
battery, or place it in an open fire. Such actions
may cause the battery to leak fluid. If spilled fluid
comes in contact with your eyes or clothing,
immediately rinse with water and consult a
physician.
• Place the battery out of reach of children. In the
unlikely event that a child swallows the battery,
immediately consult a physician.
You can also operate this unit from Smartphone
using KENWOOD Remote APP. For details, visit
<http://www.kenwood.com/cs/ce/>.
❏
Battery installation
Use two “AAA”/“R03”-size batteries.
Insert the batteries with the + and – poles aligned
properly, following the illustration inside the case.
• Always insert batteries from – poles to avoid
bending the springs.
• If the Remote Controller operates only over
shorter distances or does not operate at all, it is
possible that the batteries are depleted. In such
instances, replace both batteries with new ones.
❏
Remote Controller mode switch
The functions operated from the remote controller
differ depending on the position of the mode switch.
DVD
t
T V
t
AUD
t
AUD mode:
Switch to this mode when controlling a
selected source or tuner source, etc.
DVD mode:
Switch to this mode when playing DVDs
or CDs etc. with the player integrated in this unit.
TV mode:
Not used.
• The position of the remote control mode switch
is indicated in the title of each mode, e.g., “AUD
mode”.
• When controlling a player that is not integrated in
the unit, select “AUD” mode.
Operations from the remote
controller
❏
Common operations (AUD mode)
SRC
• Selects the source.
• Hangs up the incoming/current call.
J
/
K
VOL
Adjusts the volume level.
ATT
Attenuates/restores the sound.
DISP/V.SEL
For DDX4017DAB/DDX4017BT:
Switches between the current source
control screen and the navigation
screen.
For DDX4017BTR/DDX317BT:
Switches to the current source control
screen.
ENTER
Enters options.
Answers incoming calls.
FNC/PBC/
MENU
Switches the control screen.
MODE/
TOP MENU
Changes the aspect ratio.
• The aspect ratio changes each time
you press this key.
OPEN
Not used for this unit.
2017DDX-Entry̲E.indb 59
2017DDX-Entry̲E.indb 59
2016/10/31 14:33
2016/10/31 14:33
