D-S3 0 0 (En)
1 8
Repeated playback
To repeat only the programmed tracks
: Keys and control used in the operations described on this page.
Preparation
÷
Load a disc in the CD player.
÷
Set the INPUT SELECTOR to ” CD“ on the
connected device such as AV CONTROL
CENTER or receiver.
M ULTIPLE CD PLAYER D-S3 0 0
2
Select the desired track No.
Go to step
2
w ithin 8 seconds.
1 2 3
4 5 6
7 8 9
0 +10
ENTER
+10
5
4
3
2
1
0
9
8
7
6
3
Set the entry.
Go to step
3
w ithin 8 seconds.
P.mode
ENTER
P.MODE
4
Repeat steps
2
–
3
above.
5
Sw itch REPEAT ON.
Repeat
Return
ENTER
ENTER
÷
All of the programmed tracks w ill be repeated.
÷
In case only one track is programmed, only that track w ill be repeated.
÷
Up to 32 tracks can be programmed. When
“
FULL
”
is displayed, no
more tracks can be programmed.
To cancel repeated playback
Press the REPEAT key tw ice. (REPEAT ON
→
OFF)
(
1
Press so that the “PGM ” indicator lights.
P.MODE
PGM
Mode
P.mode
ENTER
ENTER
ENTER
GRC operation
RC operation
E
R
E
P
T
A
ON
6
Start playback.
PGM
ENTER
ENTER
6
The current status is displayed w hen the key is pressed
once. When it is pressed w hile the status is displayed, the
repeat ON status can be set to OFF (or vice versa).
GRC operation
To display the current status, first select the
Ret urn
icon and press
the
EN TER
key, and then select the
Repeat
icon and press the
EN TER
key.
Pressing the
EN TER
key again w hile the status is displayed w ill set
the repeat ON status to OFF (or vice versa).
G
P
0
M 1
N
T
.
O
?
?
GRC operation
: Complete the procedure in “Basic Operations
for the Graphical Remote Control Unit (GRC)”
90
REPEAT
M ain unit operation
http://www.usersmanualguide.com/
