Kenwood CK 414, Инструкция по эксплуатации

Страница: 42 / 44

42
ELECTRICAL FEEDER CABLE CONNECTION
To connect the supply cable:
- Remove the screws securing the cover “ A ” on the rear of the cooker (fig. 11.1).
- Feed the supply cable through the cable clamp “ D ”. The supply cable must be of a
suitable size for the current requirements of the appliance; see the section “Feeder
cable section”.
- Connect the wires to the terminal block “ B ” as shown in the diagram in figure 11.2;
or connect the phase wires to the terminal block “ B ” and the earth wire to the terminal
PE as shown in figure 11.1.
- Take up any slack in the cable and secure with the cable clamp “ D ”.
- Replace the cover “ A ”.
N.B. The earth conductor must be left about 3 cm longer than the others.
Fig. 11.1
D
B
PE
A
N
L
FEEDER CABLE SECTION TYPE
HO5RR-F
230 V 3 x 2,5 mm
2
230 V
PE N L
1
(L
2
)
Fig. 11.2
PE Earth
N Neutral
L Live