Kenwood C-V100, Руководство по обслуживанию

Страница: 4 / 45

CONTROLS
C-V100/V150/V300/V350
4
ON/STANDBY
PHONES
INPUT TAPE 2
(MONITOR)
CLOCK
TIMER
MODE
TIMER
SET AUTO A.MEMO BAND TUNING MODE MULTI. CONTROL
LEVEL
VOLUME CONTROL
DOWN UP
AUTO
FM
AM
TAPE 2
STEREO
TUNED
MUTE SLEEP
dB
ms
MHz
kHz
SOURCE
DIRECT
MEMO
ON/STANDBY
TIMER 1 2
DSP
3 STEREO
PRO LOGIC
POWER
5 $ ^ 8 7 9 ! @ 6 0 # % &
3 4
1 2
*
The keys which have the same names as the controls on the
remote control unit provide the same functions as them.
Memory indicator
Frequency display, input
selector display, preset
channel display, surround
mode display
Decibel indicator
Delay time indicator
DSP indicator
TAPE 2 indicator
AUTO tuning mode/AUTO
stereo reception indicator
STEREO indicator
TUNED indicator
MUTE indicator
SOURCE DIRECT indicator
PRO LOGIC
indicator
3 STEREO
indicator
Receiving
frequency unit
indicators
Display
STANDBY mode indication
While standby mode is indicated, a small amount of power is supplied to the system to back up the memory. In this mode, the system can be
turned ON by remote control.
TIMER
indicators Broadcast band
indicators
SLEEP
TIMER
indicator
For C-V100
1
POWER
(ON/STANDBY) key
(U.S.A. and Canada)
Press to switch between ON and STAND-
BY.
2
(ON/STANDBY) key
Press to switch between ON and STAND-
BY.
3
STANDBY indicator
4
Remote sensor
5
PHONES jack
For use in headphones listening.
6
INPUT SELECTOR key
Press to select the input.
7
TAPE 2 (MONITOR) key
For use in monitoring of recording, etc.
8
CLOCK key
Press to set the clock.
9
TIMER MODE key
Press to switch the timer modes.
0
TIMER SET key
Press to set the timer function.
!
AUTO key
Press to select the tuning mode.
The auto tuning or manual tuning mode
can be selected.
The input selection display of a source can
be switched to another by pressing and
holding the AUTO key for more than 2
seconds.
@
A.MEMO key
Press when using the auto memory func-
tion.
#
BAND key
Press to switch the broadcasting band.
$
TUNING keys (
∧
,
∨
)
Press to select the radio station to be re-
ceived.
These keys are also used in the clock ad-
justment and timer operations.
%
MODE key
Press to switch various setting modes.
^
MULTI. CONTROL key
Press to select various setting modes.
&
VOLUME CONTROL knob
*
GRC transmitter
Outputs the signals transmitted to the
Graphical Remote Control.
C-V100(K) 1˜16pnew 97.7.15 7:34 PM ページ 4