CONTROLS
C-V100/V150/V300/V350
3
1
(ON/STANDBY) key
Press to switch between ON and STAND-
BY.
2
VOICE ACTIVATE indicator
Lights to indicate an occurrence of voice
activation.
3
Remote sensor
4
TIMER SET key
Press to set the timer function.
5
CLOCK key
Press to set the clock.
6
VOICE ACTIVATE ON/OFF key
Press to switch the voice-activation opera-
tion ON and OFF.
7
VOICE ACTIVATE SET 1 key
Press to record words for use in voice ac-
tivation.
8
VOICE ACTIVATE SET 2 key
Press to record words for use in voice ac-
tivation.
9
STEREO key
0
DSP key
!
DOLBY key
@
MODE key
Press to switch various setting modes.
#
MULTI.CONTROL key
Press to select various setting modes.
$
GRC transmitter
Outputs the signals transmitted to the
Graphical Remote Control.
%
PHONES jack
For use in headphones listening.
^
INPUT SELECTOR key
Press to select the input.
&
TAPE 2 (MONITOR) key
For use in monitoring of recording, etc.
*
TIMER MODE key
Press to switch the timer modes.
(
S.DIRECT key
Press to switch the Source Direct function
which allows to reproduce the source with
a better quality.
)
RDS DISPLAY key
Press to switch the RDS display.
¡
RDS PTY key
For use during reception of RDS broad-
casting.
™
RDS TA/NEWS/INFO. key
For use during reception of RDS broad-
casting.
£
A.MEMO key
Press when using the auto memory func-
tion.
¢
AUTO key
Press to select the tuning mode.
The auto tuning or manual tuning mode
can be selected.
The input selection display of a source
can be switched to another by pressing
and holding the AUTO key for more than
2 seconds.
∞
BAND key
Press to switch the broadcasting band.
§
TUNING keys (
∧
,
∨
)
Press to select the radio station to be re-
ceived.
These keys are also used in the clock ad-
justment and timer operations.
¶
OPEN/CLOSE key
•
VOLUME CONTROL knob
ON/STANDBY
PHONES
INPUT
TAPE 2
(MONITOR)
VOLUME CONTROL
DOWN
UP
AV CONTROL CERTER KC-2
^
2
CLOCK
TIMER
MODE
RDS
PTY
DISPLAY
TIMER
SET
S.DIRECT
ON/OFF
TA/NEWS/INFO.
SET 1
SET 2
VOICE
ACTIVATE
STEREO
DSP
A.MEMO
AUTO
BAND
TUNING
PTY SELECT
MODE
MULTI.CONTROL
LEVEL
•
OPEN/CLOSE
8
4
1
3
5 6
@
7
0 !
9
#
$
¶
VOICE
ACTIVATE
%
R D S
&*
(
¡ ™
)
£ ¢ ∞
§
AUTO
RDS
EON
PTY
TIMER
NEWS
INFO.
FM
LW
MW
TA
TP
PRO LOGIC
3 STEREO
DSP
TAPE 2
STEREO
TUNED
MUTE
SLEEP
dB
ms
MHz
kHz
1
2
SOURCE
DIRECT
MEMO
The keys which have the same names as the controls on the
remote control unit provide the same functions as them.
MEMORY indicator
RDS indicators
(RDS, TP, TA, EON, PTY, NEWS, INFO.)
Frequency display, input
selector display, preset
channel display, surround
mode display
Decibel indicator
Delay time indicator
DSP indicator
TAPE 2 indicator
AUTO tuning
mode/AUTO stereo
reception indicator
STEREO indicator
TUNED indicator
MUTE indicator
SOURCE DIRECT indicator
SLEEP
TIMER
indicator
PRO LOGIC
indicator
3 STEREO
indicator
Receiving frequency
unit indicators
Display
STANDBY mode indication
While standby mode is indicated, a small amount of power is supplied to the system to back up the memory. In this mode, the system can be
turned ON by remote control.
With this unit, standby mode is indicated by means of the display panel. The system is in standby mode while the clock display is shown.
TIMER
indicators
Broadcast band indi-
cators
C-V100(K) 1˜16pnew 97.7.15 7:34 PM ページ 3
